Page 33
English
6. Press Control
%
%
%
%
%
/
fi
fi
fi
fi
fi
until “–DELAY +” appears on the display.
7. Press Control
@
@
@
@
@
/
#
#
#
#
#
to adjust the delay time of the rear speaker output.
Each time you press the button, the delay time changes as follows:
DELAY 1
Select this when the distance from you to your rear speakers is greater than that
to the front speakers.
DELAY 2
Select this when the distance from you to your rear speakers is almost equal to
that to the front speakers.
DELAY 3
Select this when the distance from you to your rear speakers is a little less than
that to the front speakers.
DELAY 4
Select this when the distance from you to your rear speakers is much less than
that to the front speakers.
Note:
When you have selected “3CHLOGIC,” you cannot adjust the delay time.
8. Press Control
%
%
%
%
%
/
fi
fi
fi
fi
fi
until “TEST” appears on the display, then press Control
@
@
@
@
@
/
#
#
#
#
#
to start
checking the speaker output balance.
“TEST” starts flashing on the display, and a test tone comes out of the speakers in the following
order:
Notes:
• No test tone comes out of the rear speakers when you have selected “3CHLOGIC.”
• No test tone comes out of the center speaker when you select “PHANTOM” or “OFF” for the center
mode.
9. If necessary, adjust the speaker output level as follows:
• To adjust the rear speaker output level, press Control
%
/
fi
until “– REAR +” appears on the
display, then press Control
@
/
#
.
• To adjust the center speaker output level, press Control
%
/
fi
until “–” appears on the
display, then press Control
@
/
#
.
Notes:
• You cannot adjust the left and right rear speaker output level separately.
• You cannot adjust the rear speaker output level when you have selected “3CHLOGIC.”
• You cannot adjust the center speaker output level when you select “PHANTOM” or “OFF” for the
center mode.
DELAY 1
DELAY 2
DELAY 4
DELAY 3
Left front speaker
Center speaker
Rear speakers
Right front speaker
Front panel
Front panel
Front panel
RX-730RBK(EF)0054-001A.En.29-36
97.7.25, 6:37 PM
33