JVC RX-730R, Инструкция по эксплуатации

Страница: 35 / 58

Page 30
English
SURROUND
ADJUST
DELAY 1
DELAY 2
DELAY 4
DELAY 3
3. Press SURROUND ADJUST so that the Control
% % % % %
/
fi fi fi fi fi
/
@ @ @ @ @
/
# # # # #
buttons work for surround
settings.
The lamp next to the button lights up.
4. Press Control
% % % % %
/
fi fi fi fi fi
until “– REAR +” appears on the display.
5. Press Control
@ @ @ @ @
/
# # # # #
to adjust the rear speaker output level.
• Pressing Control
@
decreases the output level up to –10 dB.
• Pressing Control
#
increases the output level up to +10 dB.
6. Press Control
% %
% % %
/
fi fi
fi fi fi
until “–DELAY +” appears on the display.
7. Press Control
@ @
@ @ @
/
# #
# # #
to adjust the delay time of the rear speaker output.
Each time you press the button, the delay time changes as follows:
DELAY 1 Select this when the distance from you to your rear speakers is greater than that to the front
speakers.
DELAY 2 Select this when the distance from you to your rear speakers is almost equal to that to the
front speakers.
DELAY 3 Select this when the distance from you to your rear speakers is a little less than that to the
front speakers.
DELAY 4 Select this when the distance from you to your rear speakers is much less than that to the
front speakers.
To cancel the Hall surround, press Control
%
/
fi
until “SURR OFF” appears in step 2.
The HALL and SURROUND indicators go off.
From the remote control:
1. Press SURROUND MODE repeatedly until “HALL” appears on the display.
The HALL and SURROUND indicators also light up on the display.
Each time you press the button, the surround modes change as follows (the indicator of the selected
surround mode also lights up on the display):
2. Open the outside panel and press SOUND CONTROL on the remote mode section.
3. Press REAR +/– to adjust the rear speaker output level.
• Pressing REAR – decreases the output level up to –10 dB.
• Pressing REAR + increases the output level up to +10 dB.
4. Press DELAY to adjust the delay time.
Each time you press the button, the delay time changes as follows:
To cancel the Hall Surround, press SURROUND MODE until “SURR OFF” appears on the display.
The HALL and SURROUND indicators go off.
SURROUND
MODE
SOUND
CONTROL
7/P 8
+ –
REAR
2
DELAY
DELAY 1
DELAY 2
DELAY 4
DELAY 3
PROLOGIC 3CHLOGIC
SURR OFF
HALL
(Surround Off)
Front panel
Remote: Outside
Remote: Inside
RX-730RBK(EF)0054-001A.En.29-36 97.7.25, 6:37 PM 30