JVC RX-7001PGD Скачать руководство пользователя страница 30

Страница: 30 / 58

English

5. Press TEST again to stop the test tone.

6. Press EFFECT to select an effect

level you want.

• Each time you press the button, the effect

level changes as follows:

As the number increases, JVC Theater Surround becomes
stronger.

On the front panel:

You can also use the buttons on the front panel to adjust the
Surround modes. However, no test tone is available when using the
buttons on the front panel. So, make adjustments while listening to
the sound of the source played back.

1. Press DSP MODE repeatedly until

“THEATER” appears on the
display.

The

PRO LOGIC and DSP indicators

also light up on the display.

2. Adjust the speaker output levels.

1) Press (BALANCE/) SURROUND

ADJUST repeatedly until one of the
indications appears on the display.
“CENTER LEVEL”:

To adjust the center speaker level.

“REAR L LEVEL”:

To adjust the left rear speaker level.

“REAR R LEVEL”:

To adjust the right rear speaker level.

2) Turn MULTI JOG to adjust the

selected speaker output level (from
–10 dB to +10 dB).

3) Repeat 1) and 2) to adjust the other

speaker output levels.

3. Adjust the effect level.

1) Press (BALANCE/) SURROUND

ADJUST repeatedly until “DSP
EFFECT” appears on the display.
The display changes to show the current
setting.

2) Turn MULTI JOG to select the effect

level.
As you turn it, the effect level changes as
follows:

As the number increases, JVC Theater Surround becomes
stronger.

BALANCE/

SURROUND

ADJUST

DSP EFFECT 1

DSP EFFECT 2

DSP EFFECT 3

DSP EFFECT 4

DSP EFFECT 5

MULTI JOG

EFFECT

TEST

BALANCE/

SURROUND

ADJUST

MULTI JOG

DSP EFFECT 1

DSP EFFECT 2

DSP EFFECT 3

DSP EFFECT 4

DSP EFFECT 5

SURROUND ON/OFF

SURROUND

ON/OFF

On the remote control

Activating the DSP Modes

You can use only one DSP mode at a time. When a DSP mode is
activated, another DSP mode is canceled if in use.

For Dolby Pro Logic, Dolby Digital, DTS Digital
Surround and MPEG Multichannel

1. Press SURROUND ON/OFF so that the lamp on

the front panel button lights up.

• Each time you press the button, the Dolby/DTS/MPEG

Surround turns on and off alternately.

2. Select and play a sound source.

• To enjoy Dolby Pro Logic, play back a software encoded with

Dolby Surround and labeled with

DOLBY SURROUND

mark.

• To enjoy Dolby Digital, play back a software encoded with

Dolby Digital and labeled with

D I G I T A L

mark.

• To enjoy DTS Digital Surround, play back a software encoded

with DTS Digital Surround and labeled with

mark.

• To enjoy MPEG Multichannel, play back a software encoded

with MPEG Multichannel and labeled with
mark.

To cancel the Dolby/DTS/MPEG Surround mode

Press SURROUND ON/OFF again so that the lamp on the front
panel button goes off. (“SURROUND OFF” appears on the display.)

SURROUND

ON/OFF

On the remote control

SURROUND ON/OFF

On the front panel

DSP MODE

EN20_29.RX-7001PGD[U,US]/f

00.5.31, 10:56 AM

Содержание RX-7001PGD



























































Результаты поиска

Содержание RX-7001PGD

Отзывы:

Похожие инструкции для RX-7001PGD

Бренды по названию

Популярные бренды

JVC RX-7001PGD, Инструкция по эксплуатации

Результаты поиска

Содержание RX-7001PGD

Отзывы:

Похожие инструкции для RX-7001PGD

Бренды по названию

Популярные бренды