background image

Important Information 

Legal Notice 

Attention:

 

The content and instructions of this document are 
subject to change without prior notice. Updates 
will be added to the manual. 

Best effort have been conducted to verify the 
correctness of the content in this manual, but no 
statement, information, or recommendation in this 
manual shall constitute formal guarantee of any 
kind, expressed or implied. We shall not be held 
responsible for any technical or typographical 
error in this manual. 

The product and graphic appearance 
demonstrated in this manual is for reference only, 
and may differ from the actual appearance of your 
device and associated software applications.  

Use of this manual and the subsequent result shall 
be entirely on the user’s own responsibility.  

Reference to product names of other companies 
in this manual are the trademark or registered 
trademark of the respective companies.  

Warnings 

• If the product does not work properly, please 

contact your dealer. Never attempt to 
disassemble the controller yourself (we will not 
assume any responsibility for problems caused 
by unauthorized repair or maintenance) 

• This installation should be made by a qualified 

service person and should conform to all the 
local codes  

• When shipping, the controller should be packed 

in its original packaging 

• Make sure the power supply voltage is correct 

before using the controller 

• Do not drop the controller or subject it to 

physical shock 

Maintenance Precautions 

• If there is dust on the controller and the 

displays, remove the dust gently using a oil-free 
brush or dust blowing apparatus  

• Do not use organic solvents, such as benzene or 

ethanol when cleaning the surface of the 
controller 

Regulatory Compliance 

For private households: Information on 
Disposal for Users of WEEE  

This symbol on the product(s) 
and / or accompanying documents 
means that used electrical and 
electronic equipment (WEEE) 
should not be mixed with general 
household waste. For proper 
treatment, recovery and recycling, please take this 
product(s) to designated collection points where 
it will be accepted free of charge.  

Alternatively, in some countries, you may be able 
to return your products to your local retailer upon 
purchase of an equivalent new product.  

Disposing of this product correctly will help save 
valuable resources and prevent any potential 
negative effects on human health and the 
environment, which could otherwise arise from 
inappropriate waste handling.  

Please contact your local authority for further 
details of your nearest designated collection 
point.  

Penalties may be applicable for incorrect disposal 
of this waste, in accordance with you national 
legislation. 

For professional users in the European Union 

 

If you wish to discard electrical and electronic 
equipment (EEE), please contact your dealer or 
supplier for further information. 

For disposal in countries outside of the 
European Union 

 

This symbol is only valid in the European Union 
(EU). If you wish to discard this product please 
contact your local authorities or dealer and ask for 
the correct method of disposal. 

3

Figure 1

Содержание RM-LP250M






















Отзывы: