JVC RD-E661B-DAB, Инструкция по эксплуатации

Страница: 9 / 88

EN
CD/MP3 OPERATION
Discs for Playback
This system can playback all digital audio CD, MP3, finalized digital audio CD-Recordable
(CD-R) discs, finalized digital audio CD-Rewritable (CD-RW) discs and CD-DA format digital
audio CD/CD-R/CD-RW discs.
LOADING A DISC
1. Press the
FUNC.
button to choose
CD
mode.
2. Open the CD door. “ OPEN ” will be shown on the display.
3. Place an audio CD into the tray with the label side facing up.
4. Close the CD door. The display will show “ CD--READING ”, then the total number of tracks
would be shown and the playback will start from track.
5. To remove the CD, press
/MENU/INFO
button and open CD compartment lid, grasp the
CD by its edges, and carefully take it out.
Note:
Make sure the disc is stopped before opening the CD door.
To ensure good system performance; wait until the disc tray completely reads the disc before proceeding.
If no disc is loaded into the compartment, or the disc is placed upside down, the display will show
“
NO DISC
“
.
PLAYING A DISC
1. The playback starts from track 1 automatically when reading the disc.
2. To pause playback, press /SCAN/SELECT button. The current playing time and “ PLAY ”
will flash on the display To resume playback, press the /SCAN/SELECT button again.
3. To stop playback, press the
/MENU/INFO
button, the total number of tracks appears
on the display.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
Press the
/TUN+
or
/TUN-
button repeatedly in stop mode or during play until the desired
track appears on the display. It will start play automatically.
To search for a particular passage during playback (track scanning at high speed)
Press and hold the
/TUN+
or
/TUN-
button to scan the current playing track at high speed
until desired passage appears, and then release the button. Playback will start again from this
point.
To select a song which track number exceeds 10 (for USB/MP3 disc only)
To select a song/track which number exceeds 10, press the 10/FOLD./M.+ or /M.- button each
time to skip forward/backward 10 tracks, then press the /TUN+ or /TUN- button to select
desired track.
To Select A Desired Folder (for USB/MP3 that contains more than one folder)
To select a desired folder, press and hold the 10/FOLD./M.+ or /M.- button tune to next/pre -
vious folder.
PROGRAM TRACKS
Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks /MP3
99 tracks can be stored in the memory in any order.
1. In stop mode, press the PROG./MEM. button to enter program setting, the “ MEM ” logo and
“ P01 “ will flash on the display.