JVC RC-EX30B, Инструкция по эксплуатации

Страница: 21 / 145

16
English
Presetting stations
You can preset 20 FM and 10 AM stations.
PUSH
PLA
Y/P
AU
SE
ST
OP
PROGRAM/
CLOCK SET
HBS/
PRESET EQ
DISPLAY
TA
PE
CD
BAND
RANDOM
TUNER
GRO
UP
REMOTE
SENSOR
PRESET
UP
PRESE
T DOWN
TAPE
FM MODE
/BEAT CUT
PROGRAM/
CLOCK SET
UP
DOWN
INTRO
HBS/
PRESET EQ
REPEAT
STANDBY/ON
DISPLAY
MUTING
PRESET
VOLUME
RM-SRCEX30J REMOTE CONTROL
1 2 3
4 5 6
7 8 9
0
OVER
CD/
RANDOM
TUNER/
BAND
GROUP
+
–
2,6 3,5,6 4,6 1 4,6
2,6
3,5,6 1
4,6
There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 3
again.
Note:
In some cases, test frequencies have been already
memorized for the tuner since the factory examined the
tuner preset function before shipment. This is not a
malfunction. You can preset the stations you want into
memory by following the presetting method.
1 Press BAND/TUNER to select the band, FM or
AM.
2 Press
4
or
¢
to tune in the station you want to
preset.
3 Press PROGRAM/CLOCK SET.
The PROGRAM indicator and the preset number start
blinking in the display window.
MHz
PROGRAM
4
Press PRESET UP or PRESET DOWN to select
the preset number.
You can use the number buttons on the remote control
unit to select the preset number directly.
Example:
To select preset number 5, press 5.
To select preset number 15, press OVER, 1, then 5.
To select preset number 20, press OVER, 2, then 0.
MHz
PROGRAM
Preset number
5 Press PROGRAM/CLOCK SET.
The tuned station in step 2 is stored in the preset
number selected in step 4.
Storing a new station on a used number erases the
previously stored one.
If you used the number buttons to select the preset
number in step 4, pressing PROGRAM/CLOCK SET
is not necessary in this step.
6 Repeat steps 2 to 5 to preset other stations, using
different preset numbers.
Tuning in a preset station
1 Press BAND/TUNER to select the band, FM or
AM.
2 Press PRESET UP or PRESET DOWN repeatedly
until the desired preset number appears.
You can use the number buttons on the remote control
unit to select the preset number directly.
Example:
To select preset number 5, press 5.
To select preset number 15, press OVER, 1, then 5.
To select preset number 20, press OVER, 2, then 0.
Note:
If you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If
this happens, preset the stations again.
02_01-23_RC-EX30B_E_En.p65 04.5.18, 9:41 PM 16