EN
ALARM OPERATION
NOTE: Before setting the alarm time, make sure the Clock has been set.
Setting Alarm 1 or Alarm 2
• In standby mode, press and hold
AL1
or
AL2
for 2 seconds. The hour and
minute digits will flash.
• Set the alarm time by repeatedly pressing
hr
and
min
respectively.
NOTE: Press and hold
hr
and
min
for fast forward.
• Press
AL1
or
AL2
again to select the alarm sound (OFF > BUZZER > RADIO
in cycle).
Checking alarm time
Press and hold
AL1
or
AL2
for 2 seconds, the alarm time will flash on the
display.
Turn off the alarm
Press
power
to turn off the alarm. The alarm will come on again at the set time
on the following days.
Snooze function
This function can be used to stop the alarm temporarily for about 9 minutes
once the alarm is activated. When the
snooze
button is pressed, the buzzer or
radio alarm sounds will stop and sound again after about 9 minutes.
To cancel the alarm
Press repeatedly
AL1
or
AL2
until the alarm indicator light goes out on the
display.
SLEEP TIMER OPERATION
The sleep function is designed to automatically turn off the Radio.
Setting sleep timer
• Press
sleep
, “90” will illuminate on the display.
• Press repeatedly
sleep
to select the desired sleep time from 90, 80, 70, 60,
50, 40, 30, 20 or 10 minutes.
• The radio will be turned off after the selected time has elapsed.
NOTE: To check remaining sleep time, press
sleep
. To cancel sleep timer, press
sleep
until
“OFF” is selected. To turn off the radio before the sleep time has elapsed, press
power
.
PROJECTOR
Switch on the projection clock by pressing the
Projection On/Flip/Off
. Press
and hold this button for 2 seconds to flip the projection view upside down.
To switch off the projection clock press this button again.
Содержание RA-E211B
Страница 2: ......
