JVC PD-35D30ES, Руководство по обслуживанию

Страница: 23 / 188

PD-35D30ES
(No.52091)1-23
3.6 BASIC OPERATION OF THE SERVICE MENU MODE [USING REMOTE CONTROL UNIT]
3.6.1 HOW TO ENTER THE SERVICE MENU MODE
(1) Press the [INFORMATION] key and the [MUTING] key of
the REMOTE CONTROL UNIT simultaneously, and the
SERVICE MENU screen of Fig.4 will be displayed.
(2) When the Main Menu is displayed, press any key of the [1]
to [0] key to enter the corresponding menu mode.
*Press any of the [1] to [0] keys before the Service Menu
mode disappears.
(3) Select the service item using the [FUNCTION (UP/DOWN)]
key.
(4) Set the value using the [FUNCTION (+/-)] key.
(5) Press the [OK] key to save the value.
Fig.4
3.6.2 HOW TO EXIT THE SERVICE MENU MODE
Press the [INFORMATION] key to exit the Service Menu mode.
3.6.3 SERVICE CONTROL KEY LAYOUT ON THE REMOTE
CONTROL UNIT
Fig.5
3.6.4 SETTINGS OF THE SERVICE MENUS
3.6.4.1
[1. IF] (VCO adjustment, ATT setting)
[Do not adjust]
3.6.4.2 [2. V/C] (VIDEO setting)
[Do not change settings of items that are not included in the
“ADJUSTMENT PROCEDURE”.]
Sets output data to the video circuit.
• [Function (up/down)] key
For scrolling up/down the setting items.
• [Function (+/-)] key
For scrolling up/down the setting values.
3.6.4.3 [3. AUDIO] (SOUND setting)
[Do not adjust]
3.6.4.4 [4. DD/CM] (Panel picture processing setting)
[Do not change settings of items that are not included in the
“ADJUSTMENT PROCEDURE”.]
Sets output data to the deflection circuit.
• [Function (up/down)] key
For scrolling up/down the setting items.
• [Zoom (red)] key
For switching to the next item.
• [Function (+/-)] key
For scrolling up/down the setting values.
3.6.4.5 [5. VSM PRESET] (PICTURE preset setting)
[Refer to page 1-17.]
3.6.4.6 [6. STATUS]
(The version of software, the aspect, and the state of
debugging are displayed. )
[Setting for this item is not required in servicing]
3.6.4.7 [7. VNR] (Noise reduction setting)
[Do not adjust]
Sets output data to the digital noise reduction circuit.
3.6.4.8 [8. IP] (DIST setting)
[Do not adjust]
Sets output data to the DIST circuit.
3.6.4.9 [9. SHIPPING (OFF)]
[Setting for this item is not required in servicing]
3.6.4.10 [10. BUE FREE]
[Setting for this item is not required in servicing]
SERVICE MENU SCREEN SERVICE MENU SCREEN
SERVICE MENU
1. IF 2. V/C
3. AUDIO 4. DD/CM
5. VSM PRESET 6. STATUS
7. VNR 8. IP
9. SHIPPING (OFF) 0. BUS FREE
1-9 : SELECT i : EXIT
FREEZE
SUB-P
1 2 3
4 5 6
7 8
0
9
INFORMATION
ZOOM
FUNCTION-/+
OK
1~0
MUTING
FUNCTION UP/DOWN
DDT01... CMT01... DDP01... CMP01... OSD-G
DDT01 CMT01 DDP01 CMP01 OSD-G