23
ENG
L
ISH
AV28CT1EP / LCT1136-001A-U / English
INSTALL
INSTALL
INSTALL
INSTALL
To display the INSTALL menu:
1
Press the
a
a
a
a
button to display MENU
(main menu).
2
Press the
6
6
6
6
button to choose the IN-
STALL menu. Then press the
a
a
a
a
button.
■
■
■
■
LANGUAGE
LANGUAGE
LANGUAGE
LANGUAGE
You can choose the language you want to use for the on-
screen display from the language list in a menu.
1
Press the
6
6
6
6
buttons to choose LAN-
GUAGE. Then press the
a
a
a
a
button.
A sub-menu of the LANGUAGE function appears.
2
Press the
6
6
6
6
buttons to choose a lan-
guage.
3
Press the
a
a
a
a
button to complete the set-
ting.
The menu disappears.
■
■
■
■
AUTO PROGRAM
AUTO PROGRAM
AUTO PROGRAM
AUTO PROGRAM
You can automatically register the TV channels which can be
received well at your residence in the TV’s Programme num-
bers (PR) by performing the following.
1
Press the
6
6
6
6
buttons to choose AUTO
PROGRAM. Then press the
a
a
a
a
button.
The COUNTRY menu appears as a sub-menu of the
AUTO PROGRAM function.
2
Press the
5
5
5
5
and
∞
/
5
buttons to choose
the country where you are now located.
3
Press the blue button to start the AUTO
PROGRAM function.
The AUTO PROGRAM menu appears and received TV
channels are automatically registered in the Programme
numbers (PR).
To cancel the AUTO PROGRAM function:
Press the
b
button.
4
After the TV channels have been regis-
tered in the Programme numbers (PR), the
EDIT menu appears.
You can proceed to edit the Programme numbers (PR)
using the EDIT/MANUAL function. For details, see “ED-
IT/MANUAL” on page 24.
When not using the EDIT/MANUAL function:
If you do not need to use the EDIT/MANUAL function, go
to the next step.
5
Press the
a
a
a
a
button to display the T-V
LINK menu.
6
Operate the T-V LINK menu according to
the type of VCR connected to the EXT-2
terminal.
When a T-V LINK compatible VCR is not con-
nected:
Press the
b
button to exit the T-V LINK menu.
The T-V LINK menu disappears, and all the settings are
completed.
When a T-V LINK compatible VCR is connected:
Follow the operating procedure “Downloading the data
to VCR” on page 28 to transmit the Programme number
(PR) data to the VCR.
Note:
•
When your TV can detect the TV channel name from
the TV channel broadcast signal, it automatically
registers the TV channel name (ID) to the Pro-
gramme number (PR) in which the TV channel has
been registered.
•
If a TV channel you want to view is not set to a Pro-
gramme number (PR), manually set it using the
MANUAL function. For details, see “EDIT/MANUAL”
on page 24.
•
The TV channel is not registered in Programme number
PR 0 (AV). When you want to register a TV channel to PR
0 (AV) manually set it using the MANUAL function. For
details, see “EDIT/MANUAL” on page 24.
AV28CT1EP_EN.book Page 23 Tuesday, December 18, 2001 1:20 PM
