JVC MX-G70 Скачать руководство пользователя

Страница: 25 / 34

– 22 –

Turn

to select the source to play,

then press SET/DISPLAY.

• The source changes as follows:

TUNER FM

: tunes into a specified preset FM station.

go to step 6.

TUNER AM

: tunes into a specified preset AM station.

go to step 6.

– CD – –

: plays a disc from a specified track of a

specified disc.

go to step 6.

TAPE

plays a tape in deck A or B.

go to step 7.

AUX

plays an external source.

go to step 7.

When selecting “TUNER FM” or “TUNER
AM”

Turn

to select the preset station number, then

press SET/DISPLAY.
The unit enters volume setting mode.

When selecting “– CD – –”

1) Turn

to select the disc number, then press

SET/DISPLAY.

2) Turn

to set the track number, then press

SET/DISPLAY.
The unit enters volume setting mode.

Turn

to set the

volume level.

• The volume level changes as follows:

• If you select “ VOL – –,” the volume is set to the last

level when the unit has been turned off.

Press SET/DISPLAY to complete
the Daily Timer setting.

The DAILY (Daily Timer) indicator stops
flashing and remains lit. The settings you
have done are shown on the display in
sequence.

STANDBY/ON

STANDBY

Press STANDBY/ON

turn off the unit (on standby)
if you have set the Daily Timer
with the unit turned on.

If the unit is turned on when the on-time comes

Daily Timer does not work.

Even if you unplug the AC power cord or if a power
failure occurs

Once you set the timer, the timer setting may remain stored in
memory in a few days. In this case, check whether the timer setting
still remains or not.

To turn on or off Daily Timer after its setting is done

Press CLOCK/TIMER repeatedly until
“DAILY” appears on the display.

To turn off the Daily Timer, press
CANCEL/DEMO.

indicator and the DAILY (Daily Timer)

indicator go off from the display (“OFF”
appears for a while).
The Daily Timer is canceled, but the
setting for the Daily Timer remains in
memory.

To turn on the Daily Timer, press
SET/DISPLAY.

indicator and the DAILY (Daily Timer)

indicator light up on the display. The
settings you have done are shown on the
display in sequence for your confirmation.

– CD – –

TAPE

AUX

TUNER FM

TUNER AM

Continued

VOL 10

VOL 15

VOL – –

VOL 05

EN18-26.MX-G90&80&70[J]f

12/20/00, 11:05 PM

Содержание MX-G70



































Результаты поиска

Содержание MX-G70

Отзывы:

Похожие инструкции для MX-G70

Бренды по названию

Популярные бренды

JVC MX-G70, Инструкция по эксплуатации

Результаты поиска

Содержание MX-G70

Отзывы:

Похожие инструкции для MX-G70

Бренды по названию

Популярные бренды