JVC MP-XP5230 Скачать руководство пользователя страница 75

Страница: 75 / 126

About
The software version information and MAC address of the wireless LAN mode are displayed.

[Network Driver]

The network driver version information is displayed.

[Configuration Utility]

The configuration utility version information is displayed.

[NIC Firmware]

The version information and MAC address of the wireless LAN module’s firmware are
displayed.

5 When the PC is connected to the wireless network, the following message appears

on the task tray:

How to shut down the wireless LAN functions

Follow the steps below to shut down the wireless LAN functions.

Press the

and

keys at the same time.

2 The wireless LAN shutdown icon will appear on the display, and the wireless LAN

indicator

above the

F10

key will go off.

• In order to conserve power, it is recommended that the wireless LAN functions be shut down

when they are not in use.

XP72305230E_66-81

2/25/3, 5:45 PM

Содержание MP-XP5230































































































































Результаты поиска

Содержание MP-XP5230

Отзывы:

JVC MP-XP5230, Инструкция по эксплуатации, Страница: 75 / 126

Результаты поиска

Содержание MP-XP5230

Отзывы: