JVC MP-XP5230 Скачать руководство пользователя страница 58

Страница: 58 / 126

1) Mounting a memory board

Check the correct mounting direction of memory board (by observing the cut area).

Slant the memory board and insert it into its socket.

Push the memory board until it is locked, but do not apply excessive force to it.

Cautions

If it is difficult to lock the memory board, make sure that the board has been inserted securely.

Do not apply excessive force to it, or the memory board may be damaged.

2) Removing the memory board

Open the right and left support levers of the memory board by pressing them outward.

Pull out the memory board in the arrow direction.

5. Return the memory expansion cover, mount the battery pack, and retighten the

four screws.

Caution

The screws have different lengths. Be careful to use the right screw in the right place.

Cut area of memory board

Memory slot

Memory board

Memory slot

Memory board

HARDWARE

XP72305230E_52_65

2/21/3, 7:12 PM

Содержание MP-XP5230































































































































Результаты поиска

Содержание MP-XP5230

Отзывы:

JVC MP-XP5230, Инструкция по эксплуатации, Страница: 58 / 126

Результаты поиска

Содержание MP-XP5230

Отзывы: