JVC MP-XP3210 Скачать руководство пользователя страница 67

Страница: 67 / 90

System Recovery Procedure

1. Hold down the Alt and F8 keys and press the Power button to start up your PC.

When message "Do you wish to continue? (Y/N)" appears, respond with Y.

Tips

If you respond with N, the recovery is canceled. The PC will restart and the Windows OS
will start up.

2. Read the License Agreement when displayed.

If you accept the Agreement, type Y.

Tips

If you respond with N, the recovery is canceled. The PC will restart and the Windows OS
will start up.

3. Select the recovery method (disk partitioning).

When message "Select the recovery method (A (Recommended)/C)" appears, respond with
the

key as follows.

If you respond with A:

All disk partitions and files of the hard disk are recovered, and the entire PC system is
initialized to its original state.

If you respond with C:

The files of drive C are recovered and initialized.
(Usually, all data of drive D remains unaltered, as they are, and only the data of drive C
is initialized. If drive D has already been removed, the PC only has drive C.)

4. The system recovery starts, and its progress is shown on the screen.

XP7210/3210EN-66-86

02.8.6, 8:28 PM

Содержание MP-XP3210



























































































Результаты поиска

Содержание MP-XP3210

Отзывы:

Похожие инструкции для MP-XP3210

Бренды по названию

Популярные бренды

JVC MP-XP3210, Инструкция по эксплуатации

Результаты поиска

Содержание MP-XP3210

Отзывы:

Похожие инструкции для MP-XP3210

Бренды по названию

Популярные бренды