JVC LYT0002-0A1A, Инструкция по эксплуатации

Страница: 70 / 84

70
TROUBLESHOOTING
(Cont.)
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
22. •The Picture Wipe or
Dissolve functions are in
use.
•Snapshot Dissolve is in
progress.
23. •The Sepia or Monotone
effects are activated.
•Snapshot Dissolve is in
progress.
24. •This is a result of
exceedingly high contrast,
and is not a malfunction.
25.
•If Audio Dubbing or Insert
Editing have been performed
repeatedly on the same
portion of the tape,
disturbance to the sound
and picture may result.
26. •"DISPLAY" is set to "OFF" in
the Date/Time Menu.
•Interface shooting is
performed.
•The clock's lithium battery is
not loaded, or its power is
low.
27. •You have made the
indicators on the LCD
monitor disappear.
28.
•In places subject to low
temperature, images
become dark due to the
characteristics of the LCD
monitor. When this
happens, the displayed
colours differ from those that
are actually recorded. This is
not a defect of the
camcorder.
• When the LCD monitor's
fluorescent light reaches the
end of its service life, images
on the LCD monitor become
dark. Consult your nearest
JVC dealer or Technical
Service Center.
29. •The light used to illuminate
the LCD monitor causes it to
become hot.
22. • Do not try to use the
Classic Film or Strobe
effects during a scene
transition (
Z
pg. 41).
23. • Turn off Sepia or Monotone
before setting White
Balance (
Z
pg. 41).
• Wait until the Snapshot
Dissolve is finished before
setting White Balance
(
Z
pg. 26).
24.
————
25.
• Use a new, or infrequently
used, tape for Audio
Dubbing and Insert Editing
(
Z
pgs. 65, 66).
26. • Set "DISPLAY" to "ON" in
the Date/Time Menu
(
Z
pg. 12).
• During interface shooting,
the date/time does not
appear (
Z
pg. 24).
• Confirm if the clock's
lithium battery is loaded
and if it has enough power
(
Z
pg. 11).
27. • Press the IND/DISPLAY
button to make the
indicators appear on the
LCD monitor (
Z
pg. 23).
28.
• Adjust the brightness and
angle of the LCD monitor
(
Z
pg. 23).
29. • Close the LCD monitor to
turn it off or set the Power
Dial to "OFF", and let the
unit cool down (
Z
pg. 19).
22. There is no strobe when
the Classic Film and
Strobe effects are
activated.
23. White Balance cannot be
activated.
24. When shooting a subject
illuminated by bright
light, vertical lines appear.
25.
There are disturbances in
audio and video.
26. During recording, the
date/time does not
appear.
27. The indicators do not
appear on the LCD
monitor.
28.
Images on the LCD
monitor appear dark or
whitish.
29. The rear of the LCD
monitor is hot.