JVC LYT0002-088B, Инструкция по эксплуатации

Страница: 29 / 84

EN
29
Self-Timer
Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way
adding the final touch to a memorable picture.
1 OPEN LCD MONITOR
Press the PUSH-OPEN switch and open the
LCD monitor fully.
•You can tilt the LCD monitor upward to 180
degrees so that it faces forward and view
yourself while self-recording.
2
SELECT MODE
Press the lock button located on the Power
Dial and turn the Power Dial to “
” and press
RECORDING START/STOP. “ ” appears in
the LCD monitor, and the tally lamp lights and
begins blinking 15 seconds before recording
starts. When the light stops blinking and stays
on, recording begins.
3 END RECORDING
Press RECORDING START/STOP and set the
Power Dial to the “REC” or “OFF” position.
•When turning to “OFF”, it is not necessary to
press down the lock button.
To Take A Snapshot In The Self-Timer Mode . . .
..... in step 2, press SNAPSHOT instead of
RECORDING START/STOP. After 15 seconds, a
6-second still with the shutter sound effect is
recorded. After that, the camcorder enters the
Record/Standby mode.
– – – F . AUTO
PAUSE
REC
F . AUTO
OFF
P
LA
Y
REC
5S
During recording
LCD monitor
RECORDING
START/STOP
button
After 15 sec.
LCD monitor
PUSH-OPEN
Lock button
Power Dial