23
Sound adjustments
You can make sound adjustment to your preference after
completing basic setting.
Basic adjustment items
You can adjust the following items. See pages in parentheses for
details.
• You cannot select the items which is not available with the
current setting.
Items
To do
SUBWFR LVL*
1
Adjust the subwoofer output level. (24)
FRONT L LVL*
1
*
2
Adjust the left front speaker output level.
(24)
FRONT R LVL*
1
*
2
Adjust the right front speaker output level.
(24)
CENTER LVL*
1
*
2
Adjust the center speaker output level. (24)
SURR L LVL*
1
*
2
Adjust the left surround speaker output level.
(24)
SURR R LVL*
1
*
2
Adjust the right surround speaker output
level. (24)
S BACK LVL*
1
*
2
Adjust the surround back speaker output
level. (24)
S BACK L LVL*
1
*
2
Adjust the left surround back speaker output
level. (24)
S BACK R LVL*
1
*
2
Adjust the right surround back speaker
output level. (24)
D EQ 63Hz*
1
Adjust the equalization pattern of each
D EQ 250Hz
*
1
band. (24)
D EQ 1kHz
*
1
D EQ 4kHz
*
1
D EQ 16kHz
*
1
BASS BOOST
Boost the bass level. (25)
INPUT ATT
Attenuate the input level of analog source.
(25)
EFFECT*
1
Adjust the effect level. (25)
ROOM SIZE
Select the room size for your virtual listening
room. (25)
LIVENESS
Select the liveness level for your virtual
listening room. (25)
PANORAMA
Add “wraparound” sound effect with side-
wall image. (25)
CENTER WIDTH
Adjust the center channel localization
between the center speaker and the left/
right speakers. (26)
DIMENSION
Adjust sound localization pattern. (26)
CENTER GAIN
Adjust the sound localization of the center
channel. (26)
CENTER TONE*
1
Make the center tone soft or sharp. (26)
CENTER ALIGN
Align the vertical localization of the center
channel signals. (26)
*
1
You can also use the remote control for the adjustment.
*
2
If you have used Quick Speaker Setup on page 17, these
settings are not required.
Operating procedure
On the front panel:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
1
again.
Ex.: When adjusting subwoofer output level.
1
Press ADJUST.
MULTI JOG now works for the sound adjustment.
2
Turn MULTI JOG until the item you want to
adjust appears on the display.
• As you turn MULTI JOG, the adjustment items change as
follows:
3
Press SET.
The current setting for the selected item appears.
4
Turn MULTI JOG to adjust the selected item.
Your adjustment is stored.
5
Press SET.
6
Repeat steps
2
to
5
to adjust other items if
necessary.
7
Press ADJUST.
The source indication resumes on the display.
L
S.WFR
R
ANALOG
L
S.WFR
R
ANALOG
–10
0
+10
L
S.WFR
R
ANALOG
CENTER LVL
SURR L LVL
D EQ 63Hz
D EQ 250Hz
(Back to the beginning)
SURR R LVL
FRONT L LVL
FRONT R LVL
S BACK L LVL
S BACK R LVL
D EQ 4kHz
BASS BOOST
D EQ 16kHz
LIVENESS
CENTER WIDTH
PANORAMA
ROOM SIZE
DIMENSION
CENTER GAIN
CENTER TONE
CENTER ALIGN
SUBWFR LVL
S BACK LVL
INPUT ATT
EFFECT
D EQ 1kHz
2,4
1,7
3,5
23-26RX-D301S[UJ]_f.p65
05.5.25, 6:29 PM
23
