67
English
Operating JVC’s Audio/Video Components
You can operate JVC’s audio and video components with this receiver’s remote control, since control
signals for JVC components are preset in the remote control.
IMPORTANT:
To operate JVC’s audio components using this remote control:
•
You need to connect JVC audio components through the COMPU LINK-3
(SYNCHRO) jacks (see page 59) in addition to the connections using cables
with RCA pin plugs (see page 14).
•
Aim the remote control directly at the remote sensor on the receiver.
Tuner
After pressing FM/AM (with the remote control mode selector
set to “AUDIO/TV/VCR”), you can perform the following
operations:
FM/AM:
Alternates between FM and AM (MW/
LW).
1 – 10, +10:
Selects a preset channel number directly.
For channel number 5, press 5. For
channel number 15, press +10, then 5.
For channel number 20, press +10, then
10.
PTY SEARCH:
Searches for a program by PTY codes.
PTY +/–:
Selects the PTY codes.
DISPLAY MODE:
Shows the RDS signals.
FM MODE/MUTE: Changes the FM reception mode.
Sound control section (Amplifier)
You can always perform the following operations (with the
remote control mode selector set to “AUDIO/TV/VCR”):
SEA MODE:
Changes the SEA modes.
SURROUND MODE: Changes the DSP modes.
After pressing SOUND CONTROL (with the remote control
mode selector set to “AUDIO/TV/VCR”), you can perform the
following operations:
CNTR +/–:
Adjusts the center speaker output level for the Surround/DVD
MULTI playback modes.
REAR•(L) +/–:
Adjusts the left/right rear speaker output level for the DSP
modes.
Adjusts the left rear speaker output level for the DVD MULTI
playback mode.
(REAR•R) +/–:
Adjusts the right rear speaker output level for the DVD MULTI
playback mode.
DELAY:
Selects the delay time of the rear speaker sound.
EFFECT:
Selects the effect level for the DSP modes.
TEST:
Turns on or off the test tone output for the Surround mode.
CNTR TONE:
Selects the center tone level for the Surround/DVD MULTI
playback modes.
CD player
After pressing CD (with the remote control mode selector set to “AUDIO/TV/VCR”),
you can perform the following operations on a CD player:
PLAY:
Starts playing.
4
4
4
4
4
:
Returns to the beginning of the current (or previous) track.
¢
¢
¢
¢
¢
:
Skips to the beginning of the next track.
STOP:
Stops playing.
PAUSE:
Pauses playing. To release it, press PLAY.
1 – 10, +10:
Selects a track number directly.
For track number 5, press 5. For track number 15, press +10, then 5. For
track number 20, press +10, then 10. For track number 30, press +10,
+10, then 10.
Notes:
• If you use the buttons on the
front panel or the menu
function to choose a source,
the remote control will not
operate that source. To
operate a source with the
remote control, the source
must be selected using
buttons on the remote control.
• Check to see if its remote
control mode selector is set to
the correct position. To
operate audio system, TVs,
and VCRs, set it to “AUDIO/
TV/VCR.”
• Refer also to the manuals
supplied with your
components.
O
N
SC
REEN CON
TR
O
L
RM-SR774RU REMOTE CONTROL
/DBS
SOUND
CONTROL
CD
DISC
VCR
SLEEP
AUDIO
DVD MULTI
DVD
TV/DBS
VCR
CD
SEA
MODE
TEST
(REAR R)
REAR (L)
DELAY
TAPE/MD
FM/AM
PHONO
5
4
6
2
1
3
8
7
/P
9
0
+10
10
AUDIO/TV
/VCR
SET
EXIT
VCR
TAPE
CONTROL
VOLUME
CHANNEL
MUTE
FF /
¢
PLAY
PTY SEARCH
STOP
DISPLAY MODE
REC
TV/VIDEO
TV VOLUME
PAUSE
4
/ REW
TV/CATV
CNTR
CNTR TONE
ENTER
MENU
EFFECT
CATV
/DBS
FM MODE/MUTE
100+
RETURN
SURROUND
MODE
PTY +
PTY
–
MENU
Note:
After adjusting sounds, press
the corresponding source
selecting button or CD DISC to
operate your target source by
using 10 keys; otherwise, 10
keys cannot be used for
operating your target source.
EN52_78.RX-774R[E]/1
98.3.31, 2:09 PM
67
