6
z
When “Power Lamp” is set to “Off”, the Power lamp will not light up.
g
z
The power lamp will blink before the “Record” timer starts to function.
When the “Record” timer is in progress, the power lamp lights even though
the TV is off (standby). For details, refer to “Timer” (P. 11) on the separate
manual “WATCHING DIGITAL CHANNELS”.
z
Peel off the protection films pasted on the glossy finish of the TV after the
TV has been placed properly. (P. 7)
Touch sensor panel operation
Touch on the function name to operate the function
Operate the menus
Use as “MENU” button or “OK” button.
Use as “ ” and “ ” buttons.
Use as “ ” and “ ” buttons.
z
For details on menu operations, refer to “Customising your TV”
If the digital channel screen freezes, touch “TV/AV” and “MENU/OK” on
the TV’s touch sensor panel simultaneously for three or more seconds
to reset.
Change the direction of TV
Power lamp
ON: Lit
OFF: Unlit
Remote control
sensor
Eco Sensor
g
“What is “Eco Sensor”?” (P. 34)
Note
Volume
Switch to an external input. (P. 21)
Switch between digital / analogue channels. (P. 21)
Change channel.
Menu operation.
Turn on / off (standby) the TV.
z
You will hear a beep if you have touched
the button correctly.
Names and functions of parts
LT-46DS9BJ_004A_EN.book Page 6 Thursday, September 11, 2008 2:47 PM