JVC LT-40FH96, Руководство по обслуживанию

Страница: 11 / 185

(No.YA363)1-11
3.1.12 REMOVING THE SPEAKER (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 6 screws [A] .
(2) Remove the SPEAKER (L /R).
NOTE:
• Since the speaker is attached in a certain direction, attach
the speaker in the same correct direction as it has been
attached.
• When the speaker is decomposed, the performance cannot
be kept.
3.1.13 REMOVING THE LED PWB (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 2 screws [B] .
(2) Remove the LED PWB.
3.1.14 REMOVING THE LED LENS (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the LED PWB.
(1) Remove the 2 screws [C] .
(2) Remove the LED LENS.
3.1.15 REMOVING THE CARD PWB (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 3 screws [D] .
(2) Remove the CARD BASE ASS’Y.
(3) Remove the CARD SHIELD.
(4) Remove the 4 screws
[E] .
(5) Remove the CARD PWB.
3.1.16 REMOVING THE SUB POWER PWB (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 4 screws [F] .
(2) Remove the SUB POWER PWB.
3.1.17 REMOVING THE LCD PANEL UNIT (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the BACK BRACKET.
(1) Remove the 2 screws [G] , 2 screws [H] , 3 screws [J] and
1 screw [K] .
(2) Remove the MAIN BASE.
(3) Remove the 3 screws
[L] and 2 screw [M] .
(4) Remove the TOP FARAME.
(5) Remove the 2 screws
[N] and 2 screw [P] .
(6) Remove the BOTTOM FARAME.
(7) Remove the LCD PANEL UNIT from the FRONT PANEL.
(8) Remove the 2 screws
[Q] .
(9) Remove the CARD PWB BRACKET from the LCD PANEL
UNIT.
NOTE:
• Pay special attention not to break or damage on the FRONT
PANEL.
• The LCD PANEL UNIT is fixed to the FRONT PAMEL (at the
back side)by using double-side adhesive tapes. To remove
the LCD PANEL UNIT, remove the adhesive tape on the
FRONT PANEL slowly.