34
Configuring your
Configure your remote control.
A
Turn on the device manually.
B
Switch the remote control mode to a mode
that matches your device. Refer to the table
below to select an appropriate mode.
z
The indicator lights for 3 seconds each time the remote control is operated.
C
Find the remote control code for your device
according to its brand from the “Remote
control codes” list. (Refer to page A - L at the
back of this manual.)
D
Set the remote control code.
TV
STB
AUDIO
DVD
Press and hold
Enter four digit number Release the button
You can configure your TV’s remote control to operate your other devices.
MODE
Applicable devices
TV
This TV only
STB
Cable Set Top Box, Cable/PVR Combination,
Satellite Set Top Box, SAT/PVR Combination
DVD
DVD, Blu-Ray DVD, HD DVD, DVD-R, Home
Theater in Box, TV/DVD Combination
AUDIO
Amplifier, Receiver, Home Theater in Box
LT-42ED91G_EN.book Page 34 Tuesday, April 29, 2008 9:31 AM