13
Initial setup
Initial setup
General operation
1.
Connect one end of the RF coaxial cable to
the aerial socket on the wall and the other end of
WKHFDEOHWRWKH5)ȍVRFNHWDWWKHERWWRPRI
your TV.
2.
Connect the mains cable to the mains socket
after you have completed all the connections.
3.
With power cord plug connected to the mains
power socket and TV in
'Standby'
mode.At this
stage, the TV switches to standby mode. The red
LED indicator will illuminate on the front panel of
the TV.
4.
In standby mode, press the
" "
button on
the side of the TV or the button on the remote
control to turn the TV on. The red LED indicator
will turn blue.
5.
7KH¿UVWWLPH\RXWXUQWKH79RQLWZLOOJR
straight into
First Time Setup
menu. Press
the
ŻŹŸź
buttons to navigate the menu and
change the settings.
OSD Language
Selects your desired language to be displayed
on the menu. The default on-screen menu
language is set as English.
Mode Setting
Selects your desired mode setting.
+RPH0RGH9LHZLQJDWKRPH
6WRUH0RGH)RUVWRUHGHPRWKHEULJKWQHVVLV
higher than home mode.
Country
Selects the country where you will operate the
TV. The default country is set as France.
Tuner Type
6HOHFW7XQHU7\SH&DEOH$QWHQQD
Auto Scan
6HOHFWVWKHDXWRVFDQW\SH'79$79'79
ATV.
LCN
Select LCN Type On or Off.
Auto Channel Update
Select Auto Channel Update Type On or Off.
Start
Press the
ENTER
button to start auto tuning.
Auto Scan will commence. The display will show
the progress of the tuning and the number of
channels found.
6.
If you want to skip the DTV tuning, press the
MENU
button to interrupt the tuning half way.
<RXZLOOWKHQJRVWUDLJKWWR$79WXQLQJ<RXPD\
repeat the above step if you also want to skip the
ATV tuning.
Press the
SOURCE
button on the remote control
and select DTV to switch the TV to Digital
Terrestrial Television Broadcasting.
Information Banner
Whenever you change channel using the CH
/ CH
buttons or the number buttons, the TV
displays the broadcast picture along with an
information banner on the top left of the screen
(available only in DTV/ATV mode)
The information banner can be displayed a any
time while watching TV by pressing the
DISPLAY
button on the remote control.
First Time Setup
OSD Language
Mode Setting
Country
Tuner Type
English
Home Mode
France
Cable
Auto Scan
DTV+ATV
LCN
On
Auto Channel Update
Off
Start
Move
Adjust
MENU: Return EXIT: Exit
Auto Scan
Scanning CH34
Digital Channels Found:
DTV :10 Radio :0 Data:0
Analog Channels Found: 0
MENU: Skip EXIT: Exit
Getting Started
Downloaded from www.vandenborre.be
