EN
10
Antenna connection
Note:
Before you connect other appliances:
To avoid potentially damaging your set, make sure all items are switched off and disconnected from the
mains power when you make the connections.
Arrange the desired connection.
When you have finished making the connections, reconnect the mains power to the unit and switch it
back on.
Connect your antenna as shown below (H). Connections to other equipment is explained further on
P.25-26. If you have problems with reception, consult a specialist of antenna.
•
•
•
100 mm
100 mm
M4 x 10
75 mm
M4 x 10
75 mm
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(L)
(M)
(H)
(I)
(J)
(K)
Back Side
(M)
(L)
LT-22...
LT-24...
(A) C.I. slot:
for CA- module
(CAM) (if PayTV-provider
supports this).
Note:
To prevent
malfunctions and
damages, be sure to turn
off the TV before inserting
or removing the CAM
card.
(B) AV/COMPONENT
input:
Input for analogue
AV-Signal/Component-
Signal. See P.25, 26.
Note:
AV-AUDIO
input is sharing with
COMPONENT AUDIO
input.
(C) DIGITAL AUDIO
(COAXIAL) output:
digital audio output.
(D) HDMI/DVI input:
See
P.25.
(E) USB input:
See P.22-24.
(F) HEADPHONE jack:
Plug
headphones with a mini
plug (3.5 mm) into this
jack.
(G) Scart socket:
For the
connection of scart cable.
See P.26.
(H) Antenna:
Connect an
antenna.
The built-in tuner receives
all analogue cable
programmes and DVB-T/-
C channels.
(I) PC-INPUT (PC):
See
P.25.
(J) PC/DVI AUDIO input:
See P.25.
(K) Power supply:
Connect
the supplied power cable
to an AC 220-240V/50Hz
mains power supply only -
do not attempt to connect
it to any other type of
supply.
(G)
(H)
(I)
(J)
(K)
(N)
(N)
(A)
(B)
(C)
(D)
(E)
(F)
(L) Bracket holes:
Fix a wall mounting bracket (not supplied) here.
(M)
To hang the television on a wall, remove these screws and then remove the base plate.
Before performing work spread cushioning over an area to lay the TV on.
(N) Service connector cover:
Please do not open this cover. There is a socket only for service purpose inside.
J3LJ1351A.indb 10
J3LJ1351A.indb 10
4/2/12 4:53:34 PM
4/2/12 4:53:34 PM
