7
Location of controls
Description of Indicators and Controls
1. Remote sensor
2.
(Standby/On) indicator:
The LED indicator lights up red in standby mode, and blue in the power
ON mode.
3. Loudspeakers
4.
(Power)-button:
Preparation: Connect power-cable to AC220~240V/50Hz.
a) If standby-LED is red, you may power-off. To power-off, press power-button 1x and release.
For confirmation, standby-LED will change to dark. Power-on by remote control is not available.
b) If standby-LED is off, you may power-on. To power-on, press power-button 1x and release.
For confirmation, standby-LED will change to blue.
5. TV/AV/PC/ENTER button:
Select input mode. Press
TV/AV/PC/ENTER
. Then press
▲
/
▼
to select
input source.Then press
▶
. In Menu : Using as
ENTER
button.
6. MENU button:
To display the menu screen.
7.
/ /
▲
/
▼
buttons:
Press to change to a higher numbered channel set into memory. Press to
change to a lower numbered channel set into memory. In Menu: Setting.
8.
+/–/
◀
/
▶
buttons /
In Menu: Setting.
For complete disconnection from the mains power supply, remove the supplied power cable from the
socket.
5
3
6
7
8
1
4
2
3CX0501A_EN.indd 7
3CX0501A_EN.indd 7
10/8/10 4:00:23 PM
10/8/10 4:00:23 PM
