Important Safety Information
Warning and Operating Notes
Installation and serving the camera should be performed only by qualified and experienced technicians to
conform to all local codes and to maintain your warranty.
WARNING!
The use of CSA certified/UL Listed Class 2 power adapters are required to ensure
compliance.
Note:
This product is intended to be supplied by a Listed Direct Plug-In Power Unit marked
"Class 2" or Listed Adapter marked "L.P.S." (or "Limited Power Source") and rated
output DC 12V, 0.58A minimum or AC 24V, 60Hz, 0.58A minimum. (for USA)
WARNING!
To reduce the risk of fire or electric shock, do not expose the product to rain or
moisture.
Caution
Connect only one camera to the power line,
AC24V/DC12V.Do not share the power line with other
equipment. The power cable between power source and
the camera must be under 3 m.
Operating Notes
Power Supply:
This bullet camera can operate on AC 24V or DC 12V.
Note
Connectors and field wiring terminals for external Class 2
circuits provided with marking indicating minimum Class of
wiring to be used. Class 2 shall be marked adjacent to the
field wiring terminals.
Operating Conditions
y
Avoid viewing very bright objects (example, light fixtures) for extended periods.
y
Avoid operating or storing the unit in the following locations:
-
Extremely humid, dusty, hot, cold environments (where the operating temperature is outside the
recommended range of 14°F to 122°F [-10°C to +50°C].)
-
Close to sources of powerful radio or TV transmitters
-
Close to fluorescent lamps or objects reflecting light
-
Under unstable light sources (may cause flickering)
2
