Menu Settings
If HLC is selected, HLC is activated automatically when the camera detects high-luminance.
3.5 PICTURE ADJUST
PICTURE ADJUST allows you to adjust picture settings for optimal image. In the PICT ADJUST
submenu, you can adjust BRIGHTNESS, CONTRAST, SHARPNESS, HUE and GAIN value. In addition,
you can set MIRROR to ON to reflect the image.
.
3.6 ATR
Set ATR (Adaptive Tone-curve Reproduction) function. You can select ON or OFF. The default is OFF. If
selecting ON, you will enter the ATR submenu, where you can set LUMINACE and CONTRAST to
optimize by image.
*Also known as Wide Dynamic Range. This function expands the video dynamic range of the camera
and improves visibility of images even in high contrast environments.
3.7 MOTION DET
MOTION DET allows to detect moving objects on the screen. The default is OFF. If selecting ON, you
will enter the MOTION DET submenu. You can set up to 4 motion areas to detect moving objectives and
adjust the motion detection sensitivity from 0 to 127.
3.8 PRIVACY
PRIVACY function mask up to 8 privacy areas on the screen from video monitoring. The default setting is
OFF. If selecting ON, you will enter the PRIVACY submenu. You can configure up to 8 privacy areas and
set color and transparency of the privacy zones. In addition, you can enable MOSAIC function for the
privacy zone.
Note:
If you enable MOTION DET function, then PRIVACY function will support 4 zones only.
MIRROR
OFF
BRIGHTNESS
000
CONTRAST
128
SHARPNESS
128
HUE
128
GAIN
128
RETURN
LUMINANCE
LOW
CONTRAST
LOW
RETURN
REA
SEL
1/8
TOP
000
BOTTOM
000
LEFT
000
RIGHT
000
COLOR
1
TRANSP
0.00
MOSAIC
OFF
RETURN
12
