JVC KW-Z1000W, Инструкция по эксплуатации

Страница: 68 / 112

Setup
68
4
Repeat steps 2 and 3 as necessary.
5
Touch
[
Learning completed
]
.
NOTE
• When changing the function already learned,
press and hold the button you want to change
in step 2 and then touch to select the changed
function from the function list.
• Confirm the contents of the settable function on
the function list. You cannot edit the function list.
• To initialize the contents, touch
[
Learning
initialisation
]
of
[
Steering Remote
Controller
]
in User Interface screen. After you
touch
[
Initialise
]
, a confirmation message
appears. Follow the message and complete the
operation.
System Setup
You can setup System parameters.
1
Press the
[ ]
/
[ ]
button.
2
Touch
[ ]
.
3
Touch
[
SETUP
]
.
h h SETUP Menu screen appears.
4
Touch
[[
System
]
.
h h System setting menu appears.
5
Set each parameter as follows.
■ [
DEMO
]
Select the demonstration mode. Default is
“ON”.
■
[
Operation Guide Display
]
Determine whether to show the touch
screen operation guide screen every time
before HOME screen is displayed.
Default is “ON”.
■ [
Software Information
]
Confirm the software version of this unit.
(P.69)
■ [
Open Source Licenses
]
Display the open source licenses.
■ [
Initialize
]
Touch
[
Initialize
]
and then touch
[
Yes
]
to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.
■ [
OEM SETUP
]
Confirm the information about or change the
settings for using the iDatalink (commercially
available).
■ [
Language Select
]
Select a language.
■ [
Time Format
]
■ [
Clock
]
■ [
Time Zone
]
■ [
Clock Adjust
]
You can set the date and time. See
Calendar/clock settings (P.8)
.
■ [
Security Code Set
]
■ [
Security Code Cancellation
]
■ [
Security Code Change
]
You can set up a security code. See
Security
Code Setup (P.7)
.