(No.MA099)1-9
3.1.6 Removing the CD mechanism assembly
(See Fig.9)
• Prior to performing the following procedures, remove the front
panel assembly, rear bracket, heat sink, top chassis assembly,
main board and CD mecha control board.
(1) Remove the three screws
J
attaching the CD mechanism
assembly to the top chassis assembly.
Reference:
When attaching the CD mechanism assembly, joint the hole of
the CD mechanism assembly in boss
d
and boss
e
of the top
chassis assembly.
Fig.9
3.1.7 Removing the changer control board
(See Fig.10, 11)
• Prior to performing the following procedures, remove the front
panel assembly, rear bracket, heat sink, top chassis assembly
and bottom chassis assembly.
(1) From the back side of the bottom chassis assembly, dis-
connect the card wire from the connector
CN972
on the
changer control board. (See Fig.10)
(2) From the top side of the bottom chassis assembly, remove
the two screws
K
attaching the changer control board. (See
Fig.11)
Reference:
When attaching the changer control board, joint the hole of the
changer control board in joints
f
of the bottom chassis assem-
bly.
Fig.10
Fig.11
J
J
J
CD mechanism assembly
Boss
e
Boss
d
Top chassis assembly
CN972
Card wire
Changer control board
Bottom chassis assembly
K
Changer control board
Bottom chassis assembly
K
Joints
f
Cassette mechanism assembly
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299