52
SETTINGS
R
Using the sound equalization
t
The adjustment is memorized for each source until
you adjust the sound again. If the source is a disc,
the adjustment is stored for each of the following
categories.
– DVD-Video
– CD/VCD/Audio files/Video files (Page 71)
t
You cannot adjust the sound when the AV source
is turned off.
Selecting a preset sound mode
1
Display
the
<Audio>
screen. (Page 51)
2
Display
the
<Graphic Equalizer>
screen.
t
You can also display the phone control screen
by selecting
[
]
on the pop-up short-cut
menu. (Page 11)
3
Display the preset sound modes (
1
), then
select a sound mode (
2
)
.
t
Touch
[
]
to hide the preset sound modes.
Storing your own adjustments—Adjusting the
sound precisely
1
Display
the
<Graphic Equalizer>
screen.
(See the left column.)
2
Select a band and adjust the level of the
selected band.
t
You can adjust the level by dragging the slider
or using
[
J
]
/
[
K
]
.
t
Repeat this step to adjust the level of other
bands.
3
Activate
(
[ON]
) or deactivate (
[OFF]
) the
bass (
<Bass EXT>
) (
1
), and then adjust
the subwoofer level (
<SW Level>
)* (
2
).
t
Touch
[
H
]
/
[
I
]
to adjust
<SW Level>
.
t
When
<Bass Ext>
is set to
[ON]
, a frequency
lower than 62.5 Hz is set to the same gain
level as 62.5 Hz.
4
Store the adjustment.
A user selection window appears. Select from
[User 1]
to
[User 4]
to store your adjustment,
then touch
[Close]
to close the window.
t
To apply the adjusted equalizer to all playback
source, touch
[ALL SRC]
on the
<Graphic
Equalizer>
screen, then touch
[OK]
to confirm.
t
To make the current EQ curve flat, touch
[Initialize]
.
*
Not adjustable when
<None>
is selected for subwoofer on the
<Speaker Select>
screen. (Page 51)
R
Setting the crossover network mode
Select the appropriate crossover network mode
according to the speaker system (2-way speaker
system or 3-way speaker system).
1
Turn off the AV source. (Page 6)
2
Press while holding on the
monitor panel to display the
<X’over
Network>
screen.
3
Select the crossover network mode.
[2 way]
Select this when connecting speakers
in a 2-way system (front/rear).
[3 way]
Select this when connecting speakers
in a 3-way system (tweeter/mid
range/woofer).
A confirmation message appears. Press
[Yes]
.
Содержание KW-V820BT
Страница 1: ...B5A 1051 00 b KN 2016 JVC KENWOOD Corporation MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL KW V820BT ...
Страница 82: ...0516EHHMDWJEIN ...
Страница 83: ... JVC 0316EHHMDWJEIN ...
