JVC KW-V820BT, Инструкция по эксплуатации

Страница: 35 / 86

ENGLISH 35
OTHER EXTERNAL COMPONENTS
Using a rear view camera
t
To connect a rear view camera, see page 69.
t To use a rear view camera, a REVERSE lead
connection is required. (Page 67)
R Settings for the rear view camera
1
Display the <SETUP> screen.
On the Home screen:
t
You can also display the <SETUP> screen by
touching [ ] on the source/option selection
screen. (Page 8)
2
Display the <Camera> screen.
3
Configure the camera settings.
Setting items
[R-CAM
Interruption] t ON (Initial): Displays the picture
from the rear view camera when
you shift the gear to the reverse
(R) position.
t
OFF : Select this when no camera
is connected.
[Parking
Guidelines]
t
ON (Initial): Displays the parking
guidelines to enable easier
parking when you shift the gear
to the reverse (R) position.
t OFF : Hides the parking
guidelines.
[Guidelines
Setup]* Adjusts the parking guidelines
according to the size of the car,
parking space and so on. (See the
right column.)
* Selectable only when [Parking Guidelines] is set to [ON] .
Adjusting the parking guidelines
t
Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.
t When adjusting the parking guidelines, make sure
to use the parking brake to prevent the car from
moving.
1
Touch [Guidelines Setup] on the
<Camera> screen. (See the far left
column.)
The guidelines settings screen is displayed.
2
Touch one of the marks to adjust (
1
),
then adjust the position of the selected
mark (
2
).
Make sure that
A
and
B
are horizontally
parallel, and that
C
and
D
are the same length.
t Touch [Initialize] and after touch [Yes] to set
all the marks to the initial default position.