ENGLISH
47
CONNECTION/INSTALLATION
Connection
❏
Connecting wires to terminals
PARKING
BRAKE
REVERSE
GEAR
SIGNAL
Pin
Color and functions of Connector A and B
A4
Yellow
Battery
A5
Blue with white stripe
Power control
A6
Orange with white stripe
Dimmer
A7
Red
Ignition (ACC)
A8
Black
Ground connection
B1
Purple
Right speaker
ª
(rear)
B2
Purple with black stripe
Right speaker
·
(rear)
B3
Gray
Right speaker
ª
(front)
B4
Gray with black stripe
Right speaker
·
(front)
B5
White
Left speaker
ª
(front)
B6
White with black stripe
Left speaker
·
(front)
B7
Green
Left speaker
ª
(rear)
B8
Green with black stripe
Left speaker
·
(rear)
Red
(Ignition wire)
Unit
Yellow
(Battery wire)
Vehicle
Red (A7)
Yellow (A4)
Default wiring
Connecting the ISO connectors
You may need to modify the wiring of the
supplied wiring harness as illustrated below.
Page 49
Page 49
USB terminal:
Pages 48 – 49
Connect the aerial cord
to the aerial terminal.
10 A fuse
Connect to the vehicle’s reverse lamp harness when
using the optional rear view camera.
Connect to the vehicle’s parking
brake detection switch harness.
• For best safety, be sure to
connect the parking sensor.
To the OE remote adapter matching your car
• If no connections are made, do not let the cable come out from the tab.
Purple with white stripe
(Reverse sensor wire)
Light green
(Parking sensor wire)
3
1
Light blue with yellow stripe (Steering remote control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
Connector A
Connector B
Pages 48 – 49
KW-V̲Mid̲E.indb 47
2014/01/27 15:13
Downloaded from www.vandenborre.be