ENGLISH
33
STEERING
WHEEL
REMOTE
Wiring connection
(Not used)
Output terminals (
32
)
Brown
Purple/black
Car fuse block
Ignition switch
Light blue/yellow
Blue/white: To amplifier
Blue: To power antenna
Make this connection if your vehicle factory wiring
harness does not have “12 V ignition switch” wire.
Separate red wire
Signal cord (not supplied)
Remote wire
(not supplied)
To the steering
wheel remote
control adapter
Fuse (10 A)
Antenna terminal
Factory wiring
harness (vehicle)
Vehicle
dashboard
Black: Ground
Yellow: Battery 12 V
White/black
Gray/black
Green/black
*
2
Join the same color wires together.
Red: Ignition 12 V
Orange/white: Illumination
Blue/white: Remote (200 mA max.)
Recommended connection
IMPORTANT
We recommend installing the unit with a
commercially available custom wiring harness
specific for your car and leave this job to
professionals for your safety. Consult your car
audio dealer.
JVC Amplifier
*
1
*
1
Firmly connect the
ground wire of the
amplifier to the
car’s chassis to avoid
damaging the unit.
*
2
You can also connect
a subwoofer speaker
directly using this lead
without an external
subwoofer amplifier.
For setting,
22
.
Custom wiring harness
(separately purchased)
(For
KW-R925BTS
)
USB cable (DC 5 V
1.5 A)
(approx. 1.2 m/4 feet)
MIC (Microphone input
terminal)
( 14)
Expansion port (12 V
500 mA)
To the optional SiriusXM Vehicle Tuner
(commercially available)
( 11)
White: Front speaker/For 3-way crossover: Mid range speaker (left)
Gray: Front speaker/For 3-way crossover: Mid range speaker (right)
Purple: Rear speaker/For 3-way crossover: Tweeter (right)
Green: Rear speaker
*
2
/For 3-way crossover: Tweeter (left)
JS_JVC_KW_R925BTS_K_EN_2.indd 33
6/11/2015 3:21:42 PM