10
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
AMP
GAIN
LOW
POWER
: Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging
the speakers.) ;
HIGH POWER
: The maximum volume level is 35.
D.T.EXP
(Digital Track
Expander)
ON
: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression. ;
OFF
: Cancels.
TEL
MUTING
*
5
ON
: Mutes the sounds while using the cellular phone (not connected
through KS-BTA100). ;
OFF
: Cancels.
SPK/PRE
OUT
Depending on the speaker connection method, select the appropriate
setting to get the desired output. (
Speaker output settings
)
*
5
Does not work if [
BT
ADAPTER
] is selected for [
AUX
] in [
SRC
SELECT
]. (
4
)
Speaker output settings
Select the output setting for the speakers [
SPK/PRE OUT
], base on the
speaker connection method.
Connection via lineout terminals
For connections through an external amplifier. (
17
)
Setting on
[
SPK/PRE OUT
]
Audio signal through lineout terminal
REAR/SW
REAR/REAR
Rear speakers output
REAR/SUB.W
Subwoofer output
SUB.W/SUB.W
Subwoofer output
AUDIO SETTINGS
Connection via speaker leads
For connections without using an external amplifier. However, with this
settings you can also enjoy the subwoofer output. (
17
)
Setting on
[
SPK/PRE OUT
]
Audio signal through rear speaker lead
L (left)
R (right)
REAR/REAR
Rear speakers output
Rear speakers output
REAR/SUB.W
Rear speakers output
Rear speakers output
SUB.W/SUB.W
Subwoofer output
(Mute)
If [
SUB.W/SUB.W
] is selected:
– [
HIGH 120HZ
] is selected in [
SUB.W
LPF
] and [
THROUGH
] is not available.
– [
R01
] is selected in [
FADER
] and selectable range is [
R06
] to [
00
].
JS_JVC_KW_R520_M_H_EN_3.indd 10
JS_JVC_KW_R520_M_H_EN_3.indd 10
6/11/2015 11:35:51 AM
6/11/2015 11:35:51 AM
