
ENGLISH
122
Symptoms
Remedies/Causes
Navigation
• Guidance does not start.
The System proceeds calibration. Wait until calibration is
completed. When calibration is completed, the guidance
starts.
• You cannot operate some functions of an AV
source on the map screen.
On the map screen, you can operate some limited
functions of the current source only. Press AV/OFF on the
remote controller or DISP and operate the source on the
AV screen.
• You cannot operate AV sources with the
remote controller on the map screen.
On the map screen,
4¢5∞
keys of the remote
controller always works for scrolling the map.
• Route calculation seems to have stopped.
Route calculation may take long depending on the route.
Wait for a while.
• Navigation voice cannot be heard from the
speakers.
<
Guidance Volume
> level is set to the minimum level.
Adjust it to the optimum level. (
☞
page 50)
• The voice guidance does not come out from
the speaker on the driver’s side.
Change the <
Output
> setting. (
☞
page 50)
• Navigation guidance is sometimes incorrect.
Reversing signal/speed signal lead are not connected.
Connect them correctly (
☞
Installation/Connection
Manual—separate volume).
• Navigation guidance is hard to listen to.
Surround noise interferes. Increase the <
Adaptive
Volume
> level. (
☞
page 50)
• “Route calculation failed.” appears on the
monitor.
Failed to calculate the route. Select another destination/
via point.
• “Specified destination is not found.” appears
on the monitor.
Valid information is not available in the database. Search
for another place.
• A POI found using <
POI Name
> in the
<
Destination Menu
> is not within the
selected city/state.
This is not a malfunction. The system may also search
areas around the selected city/state.
• “There is no available traffic information
now.” appears on the monitor.
No valid traffic information is available now.
• “Activation failed. Please try again.” appears
when trying to subscribe to traffic service.
Check your PIN code and input correct one.
• The current position displayed on the map
remains wrong for more than 30 minutes.
Check the connection information of the leads below
through <
System
> in <
Vehicle Info
>. (
☞
pages 49,
54)
– GPS antenna
– Reverse gear signal lead
If any disconnection is found, connect the lead again.
• If no problems are found with connections, reset the
calibration data by selecting <
Reset Calibration
Data
>. (
☞
page 52)
KW-NX7000[J].indb 122
KW-NX7000[J].indb 122
08.6.12 0:14:23 AM
08.6.12 0:14:23 AM
Содержание KW NX7000 - Double Din Navigation
Страница 387: ...Instructions NAVIGATION DVD RECEIVER KW NX7000 ...