p
6
7
8
9
q
w
e
r
t
5
2
3
4
1
37
ENGLISH
Checking the information of the navigation system
8
Version of the map database
9
Serial number
p
Connection status of the illumination control lead
<
On
>: The illumination signal is detected.
q
Connection status of the parking brake lead
<
On
>: The parking brake is engaged.
w
Connection status of the reverse gear signal lead
<
On
>: Reverse gear signal is detected.
• If the rear view screen is displayed when shifting
the gear to the reverse (R) position, the reverse
gear signal is detected (<
On
>).
e
Status of the gyroscope
r
Speed pulse rate
t
Status of calibration *
2
*
3
<
Processing
>: The current position cannot be
determined without data from GPS satellites.
<
Learning
>: The current position can be
determined even when the System cannot receive
data from GPS satellites.
<
Learned
>: The current position can be
determined accurately even when the System
cannot receive data from GPS satellites.
*
1
These information may not be shown correctly when
the reception of GPS signals is poor.
*
2
The calibration does not function without the
connection of GPS aerial and the speed signal lead.
For the connection,
☞
Installation/Connection
Manual (separate volume).
*
3
Driving under various conditions completes the
calibration faster. If <
Processing
> remains on the
screen for long period, check the connection of the
GPS aerial and the speed signal lead.
GPS
1
Current speed *
1
2
Direction of the car *
1
3
Latitude and longitude of your current position *
1
4
Altitude of your current position *
1
5
Date/Local time
• When the System cannot receive the GPS signals, the
value of each item above are shown as “- -”.
System
6
Name of the unit
7
Version of the software
Satellites
(Green): Receiving the GPS signals and used for the
positioning.
(Yellow): Receiving the GPS signals.
(Grey): Not receiving the GPS signals.
EN_KW-NT30[E].indb 37
EN_KW-NT30[E].indb 37
3/10/2011 4:51:19 PM
3/10/2011 4:51:19 PM