26
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
[SUB.W
LEVEL]
*1
[SPK-OUT]
*2
(Not applicable when 3-way crossover is selected.)
[SUB.W 00]
to
[SUB.W +06]
(
[SUB.W +03]
): Adjusts
the output level of the subwoofer connected via speaker
lead. (Page 40)
[PRE-OUT]
[SUB.W –50]
to
[SUB.W +10]
(
[SUB.W 00]
): Adjusts
the output level of the subwoofer connected to the
lineout terminals (SW) through an external amplifier.
(Page 40)
[SUBWOOFER
SET]
[ON]
: Turns on the subwoofer output. ;
[OFF]
: Cancels.
[FADER]
(Not applicable when 3-way crossover is selected.)
[POSITION R15]
to
[POSITION F15]
(
[POSITION 00]
): Adjusts the front and
rear speaker output balance.
[BALANCE]
*3
[POSITION L15]
to
[POSITION R15]
(
[POSITION 00]
): Adjusts the left and
right speaker output balance.
[VOLUME
ADJUST]
[LEVEL –15]
to
[LEVEL +06]
(
[LEVEL 00]
): Presets the initial volume level
of each source by comparing to the FM volume levels. (Before adjustment,
select the source you want to adjust.)
[AMP GAIN]
[LOW POWER]
: Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging the
speakers.) ;
[HIGH POWER]
: The maximum volume level is 35.
[SPK/PRE OUT]
(Not applicable when 3-way crossover is selected.)
Depending on the speaker connection method, select the appropriate setting
for the desired output. (See “Speaker output settings” on page 27.)
Audio Settings
[SPEAKER SIZE]
Depending on the crossover type you have selected (see the following
[X ‘ OVER TYPE]
), 2-way crossover or 3-way crossover setting items will be
shown. (See “Crossover settings” on page 28.)
By default, 2-way crossover type is selected.
[X ‘ OVER]
[DTA SETTINGS]
For settings, see “Digital Time Alignment settings” on page 30.
[CAR SETTINGS]
[X ‘ OVER TYPE]
Caution
: Adjusts the volume before changing the
[X ‘ OVER TYPE]
to avoid
the sudden increase or decrease of the output level.
• Once you have changed the crossover type, the next time when you turn
on the power, the display shows:
“2-WAY X’OVER” or “3-WAY X’OVER” “PRESS” “VOLUME KNOB”
“TO CONFIRM”
Press the volume knob to acknowledge in order to proceed to the next
desired operation.
[2-WAY]
(Displayed only when
[3-WAY]
is selected.)
[YES]
: Selects two way crossover type. ;
[NO]
: Cancels.
[3-WAY]
(Displayed only when
[2-WAY]
is selected.)
[YES]
: Selects three way crossover type. ;
[NO]
: Cancels.
*1 Displayed only when
[SUBWOOFER SET]
is set to
[ON]
.
*2 For 2-way crossover: Displayed only when
[SPK/PRE OUT]
is set to
[SUB.W/SUB.W]
.
(Page 27)
*3 This adjustment will not affect the subwoofer output.
KW-DB95BT_E_B5A-3884-00_EN_1st Draft.indd 26
KW-DB95BT_E_B5A-3884-00_EN_1st Draft.indd 26
17/8/2021 11:35:58 PM
17/8/2021 11:35:58 PM
