JVC KS-F150, Руководство по обслуживанию

Страница: 19 / 50

2-7
KS-F150
KS-FX12
Fig. 10 Fig. 10
Back side view of the reel base assembly
Fig. 9
Pinch-roller (R)
assembly
Selector link (B)
Turn the selector link (B)
disengage this one.
Fig. 8
Main belt
Sub belt
Reel base assembly
Motor
assembly
Motor pulley
7
7
7
8
6
Fig. 7
P. arm spring(F)
P. arm spring(R)
3
3
E Washer
E Washer
Pinch-roller
shaft
Pinch-roller shaft
Pinch-roller (R)
assembly
Pinch-roller (F)
assembly
A.arm
spring(A)
A.arm
spring(B)
Remove the P. arm spring (F)
from the chassis.
S. support plate
FF Roller
5
3
3
4
Removing the Pinch-Roller assembly ( See Fig. 7)
1. Remove the two E Washers (3) retaining the pinch-roller shaft.
2. Remove the P.Arm spring (F) from the chassis.
3. Remove the P.Arm spring (R) from the chassis.
4. Pull out the pinch-roller(F,R) assemblies from the left and right
sides.
Note : The P.arm spring (F) and P.arm spring (R) are different.
Note : The Pinch-roller (F) and Pinch-roller(R)assemblies are different.
Removing the Playback Head ( See Fig. 7 )
1. Remove the one fixed screw (4) retaining the playback head.
2. Remove the C Washer (5) to pull the FF roller out .
3. Remove the S. support plate to remove the A.arm springs (A,B)
and playback head.
Note : The A. arm spring (A) and A. arm spring (B) are different.
Removing the Motor Assembly ( See Fig. 8 )
1. Remove the main belt and sub-belt from the back side unit.
2. Remove the two screws (6) retaining the motor assembly.
Changing the Sub-Belt ( See Fig. 8 )
1. Remove the main belt from the back side unit..
2. Remove the sub-belt from the motor pulley.
3. Remove the four screws (7), (8) retaining the reel base assembly.
4. Lift up the reel base assembly slightly to change the belts.
Removing the Reel Base Assembly
( See Fig. 8 and 10)
1. Remove the selector link (B) from the front unit by turning
the selector link (B) near the pinch-roller as shown in the
figure 9.
2. Remove the four screws (7), (8) retaining the reel base
assembly.
3. Remove the reel base assembly carefully.
Note : Service for the reel base assembly is not available.