background image

9

ENGLISH

3

Tune in to a station you want while “M”
is flashing.

• If you release your finger from the button, the

manual mode will automatically turn off after 5
seconds.

• If you hold down the button, the frequency keeps

changing (in 200 kHz intervals for FM and 10 kHz
for AM) until you release the button.

When an FM stereo broadcast is hard
to receive:

1

Press MODE to enter the functions mode while
listening to an FM stereo broadcast.

2

Press MO (monaural), while still in the functions
mode, so that the MO indicator lights up on
the display.
Each time you press the button, the MO indicator
lights up and goes off alternately.

When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved.

Storing stations in memory

You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-

station Sequential Memory)

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band
(FM1, FM2 and FM3).

1

Select the band (FM1 – 3) you want
to store FM stations into.

• Each time you press the button, the FM

band changes as follows:

2

Press and hold both buttons for
more than 2 seconds.

Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2 or FM3.)
These stations are preset in the number buttons –
No.1 (lowest frequency) to No.6 (highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.

Press 

 

 

¢

 to search

stations of higher
frequencies.

Press 

4

 

 to search

stations of lower
frequencies.

“SSM” appears, then disappears when automatic
preset is over.

MODE

MO

SSM

FM

FM1

FM2

FM3

EN08-10-KD-S6350/S590[J]

f

 10/4/02, 3:44 PM

9

Содержание KDS590 - CD Receiver With 1 Output




























Отзывы: