JVC KD-X310BT, Инструкция по эксплуатации

Страница: 19 / 82

17 ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
Store a contact in memory
You can store up to 6 contacts.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [RECENT CALL] , [PHONEBOOK] , or
[DIAL NUMBER] , then press the knob.
3
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
4
Press and hold one of the number buttons ( 1 to 6 ).
“MEMORY P(selected preset number)” appears when the contact is
stored.
To erase a contact from the preset memory, select [DIAL NUMBER] in
step
2
and store a blank number.
Make a call from memory
1
Press to enter Bluetooth mode.
2 Press one of the number buttons ( 1 to 6 ).
3
Press the volume knob to call.
“NO PRESET” appears if there is no contacts stored.
Delete a contact
Not applicable for mobile phone that supports PBAP.
1 Press to enter Bluetooth mode.
2
Turn the volume knob to select [RECENT CALL] or [PHONEBOOK] , then
press the knob.
3 Turn the volume knob to select a contact or a phone number.
4 Press and hold
G
PTY .
5
Turn the volume knob to select [DELETE] or [DELETE ALL] , then press
the knob.
DELETE
: Selected name or phone number in step 3 is deleted.
DELETE ALL
: All names or phone numbers from the selected menu in
step
2
is deleted.
6
Turn the volume knob to select [YES] or [NO] , then press the knob.
Bluetooth mode settings
1
Press and hold MENU .
2 Turn the volume knob to select
[BLUETOOTH]
, then press the knob.
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4
Press MENU to exit.
To return to the previous setting item or hierarchy, press G PTY .
Default: XX
PHONE
Selects the phone or audio device to connect or disconnect.
“ ” appears in front of the device name.
AUDIO
APPLICATION Shows the connected phone name using the JVC Smart Music Control *
1
app. “ ” appears in front of the device name.
DELETE PAIR 1 Turn the volume knob to select a device to delete, then press the
knob.
2 Turn the volume knob to select [YES] or [NO] , then press the knob.
PRIORITY Selects a device to be connected as priority device. “ ” appears in front
of the device name set as priority.
•
“NO PAIR” appears if there is no registered device found.
P.BOOK WAIT
* 2
Copies up to 400 numbers from the phonebook memory of a connected
phone.
SET PINCODE
(0000) Changes the PIN code (up to 6 digits).
1
Turn the volume knob to select a number.
2
Press
S
/
T
to move the entry position.
Repeat steps
1
and
2
until you finish entering the PIN code.
3 Press the volume knob to confirm.
* 1
JVC Smart Music Control is designed to view JVC car receiver status
and perform simple control operations on Android smart phones.
For JVC Smart Music Control operations, visit JVC website:
<http://www.jvc.net/cs/car/>.
* 2
Selectable only when the connected phone supports OPP.
JS_JVC_KD_X310BT_J_04_EN.indd 17 30/12/2013 9:53:15 AM