Symptom
Remedy/Cause
4
General
No sound, sound interrupted or
static noise.
Check the cords, antenna and cable connections.
Check the condition of the connected device and recorded
tracks.
“
MISWIRING CHK WIRING THEN
RESET UNIT
”
/
“
WARNING CHK
WIRING THEN RESET UNIT
”
appears on the display and no
operations can be done.
Ensure the terminals of the speaker leads are properly insulated
with tape before resetting the unit. (
'
page 2)
If the message does not disappear, consult your JVC car audio
dealer or kits supplying company.
The unit does not work at all.
Reset the unit. (
'
page 2)
Source cannot be selected.
Check the
<
SRC SELECT
>
setting. (
'
page 13)
The correct characters are not
displayed (e.g. album name).
This unit can only display letters (upper case), numbers, and a
limited number of symbols.
4
FM/AM
SSM automatic presetting does
not work.
Store stations manually.
4
USB/iPod/iPhone
“
READING
”
keeps flashing on the
display.
A longer readout time is required. Do not use too many
hierarchical levels and folders.
Reattach the USB device.
Tracks/folders are not played
back in the order you have
intended.
The playback order is determined by the file name.
“
NOT SUPPORT
”
appears on the
display and track skips.
Check whether the track is a playable file format.
“
CANNOT PLAY
”
flashes on
the display.
The unit cannot detect the
connected device.
Check whether the connected device is compatible with this
unit. (USB:
'
page 17) (iPod/iPhone:
'
page 15)
Ensure that the device contains files in the supported
formats. (
'
page 14)
Reattach the device.
The iPod/iPhone does not turn
on or does not work. *
Check the connection between this unit and iPod/iPhone.
Detach and reset the iPod/iPhone using hard reset. For
details on resetting the iPod/iPhone, refer to the instruction
manual supplied with the iPod/iPhone.
Check whether
<
IPOD SWITCH
>
setting is appropriate.
(
'
page 8)
* For KD-X40 only.
Troubleshooting
Troubleshooting
16
|
ޓ
ENGLISH
2011/10/31
ޓ
15:50:12
KD-X40_U_EN