JVC KD-X272BT, Инструкция по эксплуатации

Страница: 25 / 156

ENGLISH
17
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Make a call to a registered number
1
Press to enter Bluetooth mode.
2 Press one of the number buttons (1 to 6).
3
Press the volume knob to call.
“NO PRESET” appears if there is no contact stored.
Bluetooth mode settings
1 Press and hold .
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press to exit.
To return to the previous setting item, press .
Default: [XX]
[BT MODE]
[PHONE SELECT] Selects the phone or audio device to connect or disconnect.
“ ” appears in front of the device name when connected.
“
” appears in front of the current playback audio device.
• You can connect a maximum of two Bluetooth phones and one
Bluetooth audio device at a time.
[AUDIO SELECT]
[DEVICE DELETE] 1 Turn the volume knob to select a device to delete, then press the knob.
2 Turn the volume knob to select [YES] or [NO] , then press the knob.
[PIN CODE EDIT]
(0000) Changes the PIN code (up to 6 digits).
1 Turn the volume knob to select a number.
2 Press
S
/
T
to move the entry position.
Repeat step 1 and step 2 until you finish entering the PIN code.
3 Press the volume knob to confirm.
Bluetooth®
[RECONNECT] [ON] : The unit is automatically reconnect when the last connected
Bluetooth device is within the connectable range. ; [OFF] : Cancels.
[AUTO PAIRING] (For KD-X372BT)
[ON] : The unit is automatically paired with the supported Bluetooth
device (iPhone/iPod touch) when it is connected through USB input
terminal. Depending on the operating system of the connected device, this
function may not work. ;
[OFF] : Cancels.
[INITIALIZE] [YES] : Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ; [NO] : Cancels.
[INFORMATION] [MY BT NAME] : Displays the name of your receiver (“KD-X372BT”/
“KD-X272BT”). ; [MY ADDRESS] : Shows address of this unit.
Bluetooth compatibility check mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold .
“BLUETOOTH” “CHECK MODE” appears. “SEARCH NOW USING
PHONE” “PIN IS 0000” scrolls on the display.
2 Search and select the name of your receiver (“KD-X372BT”/
“KD-X272BT”) on the Bluetooth device within 3 minutes.
3 Perform (A), (B) or (C) depending on what appears on the display.
(A) “PAIRING” “XXXXXX” (6-digit passkey) : Ensure that the same
passkey appears on the unit and Bluetooth device, then operate the
Bluetooth device to confirm the passkey.
(B) “PAIRING” “PIN IS 0000” : Enter “0000” on the Bluetooth device.
(C) “PAIRING” : Operate the Bluetooth device to confirm pairing.
JS_JVC_KD_X372BT_E_EN_6th.indd 17 JS_JVC_KD_X372BT_E_EN_6th.indd 17 18/7/2019 9:46:33 AM 18/7/2019 9:46:33 AM