18
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Installation/Connection
When connecting to an external amplifier,
connect its ground wire to the car’s chassis to
avoid damaging the unit.
Wiring connection
Fuse (10 A)
Antenna terminal
To the steering wheel remote control adapter
Yellow (A4)
Red (A7)
Yellow (Battery wire)
Pin
Color and function
A4
Yellow
: Battery
A5
Blue/White
: Power control (12 V
350 mA)
A6
Orange/white
: Car light control switch
A7
Red
: Ignition (ACC)
A8
Black
: Earth (ground) connection
B1
Purple
]
: Rear speaker (right)
B2
Purple/black
[
B3
Gray
]
: Front speaker (right)
B4
Gray/black
[
B5
White
]
: Front speaker (left)
B6
White/black
[
B7
Green
]
: Rear speaker (left)*
B8
Green/black
[
* You can also connect a subwoofer speaker directly without an external
subwoofer amplifier. For setting, see page 12.
Unit
Connecting the ISO connectors on some VW/
Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring
harness as illustrated below.
Vehicle
A7 (Red)
Ignition wire
(Red)
A4 (Yellow)
Default wiring
Battery wire
(Yellow)
ISO connectors
If your car does not have an ISO terminal
We recommend installing the unit with a commercially
available custom wiring harness specific for your car and
leave this job to professionals for your safety. Consult your
car audio dealer.
Rear/subwoofer output
Front output
Red (Ignition wire)
Light blue/yellow
(Steering remote
control wire)
JS_JVC_KD_X176_E_EN_3a.indd 18
JS_JVC_KD_X176_E_EN_3a.indd 18
6/10/2019 8:59:49 AM
6/10/2019 8:59:49 AM