JVC KD-X162, Инструкция по эксплуатации

Страница: 9 / 88

ENGLISH
5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
For key layout on the faceplate, see page 3 or page 4.
Cancel the demonstration
When you turn on the power for the first time (or after you reset the unit),
the display shows:
KD-X262/KD-X162:
“CANCEL DEMO” “PRESS” “VOLUME KNOB”
1
Press the volume knob.
[YES] is selected for the initial setup.
2
Press the volume knob again.
“DEMO OFF” appears.
KD-X161:
“CANCEL DEMO” “PRESS ENTER”
1
Press
*
ENTER.
[YES]
is selected for the initial setup.
2
Press
*
ENTER again.
“DEMO OFF” appears.
Set the clock and date
1 Press and hold .
2
Perform ‘Select an item (page 3 or 4)’ operation to select
[CLOCK]
.
3
Perform ‘Select an item (page 3 or 4)’ operation to adjust the
clock.
[CLOCK ADJUST] set the hour and minute [CLOCK FORMAT]
[12H]
or
[24H]
4
Perform ‘Select an item (page 3 or 4)’ operation to set the date.
[DATE SET]
set the day, month and year
5
Press to exit.
1
2
To return to the previous setting item, press .
Set the basic settings
1
Press and hold .
2 Perform ‘Select an item (page 3 or 4)’ operation to select an
item (see the following table).
3 Repeat step 2 until the desired item is selected or activated.
4
Press to exit.
To return to the previous setting item, press .
Default: [XX]
[SYSTEM]
[KEY BEEP] [ON] : Activates the keypress tone. ; [OFF] : Deactivates.
[SOURCE SELECT]
[AM SRC] * [ON] : Enables AM in source selection. ; [OFF] : Disables. (Page 6)
[BUILT-IN AUX] * [ON] : Enables AUX in source selection. ; [OFF] : Disables. (Page 8)
[F/W UPDATE]
[UPDATE SYSTEM]
[F/W UP xxxx] [YES] : Starts upgrading the firmware. ; [NO] : Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<http://www.jvc.net/cs/car/>.
* Not displayed when the corresponding source is selected.
3
JS_JVC_KD_X262_E_EN_3.indd 5 JS_JVC_KD_X262_E_EN_3.indd 5 8/14/2018 11:35:05 AM 8/14/2018 11:35:05 AM