ENGLISH
5
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
GETTING STARTED
For key layout on the faceplate, see page 3 or page 4.
Cancel the demonstration
When you turn on the power for the first time (or
[FACTORY RESET]
is set to
[YES]
), the display shows:
KD-T801BT/KD-T709BT:
“CANCEL DEMO” “PRESS ENTER”
1
Press
*
ENTER.
[YES]
is selected for the initial setup.
2
Press
*
ENTER again.
“DEMO OFF” appears.
KD-T706BT/KD-T702BT:
“CANCEL DEMO” “PRESS” “VOLUME KNOB”
1
Press the volume knob.
[YES]
is selected for the initial setup.
2
Press the volume knob again.
“DEMO OFF” appears.
Set the clock and date
1
Press and hold
.
2
Perform ‘Select an item (page 3 or 4)’ operation to select
[CLOCK]
.
3
Perform ‘Select an item (page 3 or 4)’ operation to adjust the
clock.
[CLOCK ADJUST]
set the hour and minute
[CLOCK FORMAT]
[12H]
or
[24H]
4
Perform ‘Select an item (page 3 or 4)’ operation to set the date.
[DATE SET]
set the day, month and year
5
Press
to exit.
1
2
To return to the previous setting item, press
.
Set the basic settings
1
Press and hold
.
2
Perform ‘Select an item (page 3 or 4)’ operation to select an
item (see the following table).
3
Repeat step 2 until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
[XX]
[SYSTEM]
[KEY BEEP]
(Not applicable when 3-way crossover is selected.)
[ON]
: Activates the keypress tone. ;
[OFF]
: Deactivates.
[SOURCE SELECT]
[AM SRC]
*
[ON]
: Enables AM in source selection. ;
[OFF]
: Disables. (Page 6)
[SPOTIFY SRC]
*
[ON]
: Enables SPOTIFY/SPOTIFY BT in source selection. ;
[OFF]
: Disables. (Page 10)
[BUILT-IN AUX]
*
[ON]
: Enables AUX in source selection. ;
[OFF]
: Disables. (Page 8)
[F/W UPDATE]
[UPDATE SYSTEM]
[F/W UP xxxx]
[YES]
: Starts upgrading the firmware. ;
[NO]
: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<http://www.jvc.net/cs/car/>.
[FACTORY RESET]
[YES]
: Resets the settings to default (except the stored station). ;
[NO]
: Cancels.
* Not displayed when the corresponding source is selected.
3
JS_JVC_KD_T801BT_E_EN_05.indd 5
JS_JVC_KD_T801BT_E_EN_05.indd 5
6/4/2018 9:41:14 AM
6/4/2018 9:41:14 AM
