5
ENGLISH
RADIO BASIC OPERATIONS
Listening to the radio
1
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an
FM station.
2
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency without searching
1 Press TUNER/BAND repeatedly to select the band (FM or AM).
2 Press and hold
¢
or
4
until “M” starts flashing on the display.
Now you can manually change the frequency while “M” is flashing.
3 Press
¢
or
4
repeatedly until the frequency you want is reached.
• If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and
9 kHz intervals for AM-MW/LW) until you release the button.
To tune in only stations with strong signals
Press the LO/RPT/INT (Local/Repeat/Intro) button so that “LOCAL ON” appears on the display.
Each time you press the button, “LOCAL ON” and “LOCAL OFF” appears alternately.
Note:
This function only works while searching stations including SSM preset (see page 6).
Selected band appears.
F1
(FM1)
F2
(FM2)
F3
(FM3)
AM
BAND
TUNER
To search stations
of lower
frequencies.
To search stations
of higher
frequencies.
SSM
LO/RPT
INT
1
2
EN05-17.KD-SX1000R[E]/1
98.6.3, 5:33 PM
5