45
ENGLISH
Causes
CD is inserted upside down.
You are driving on rough roads.
CD is scratched.
Connections are incorrect.
The volume control is turned to
the minimum level.
Connections are incorrect.
“P. AMP (Power Amplifier)
SWITCH” is not set correctly.
Signals are too weak.
The antenna is not connected
firmly.
No CD is in the loading slot (or
in the magazine).
CD is inserted incorrectly.
This unit is not connected to a
CD changer correctly.
The CD player may function
incorrectly.
The built-in microcomputer may
function incorrectly due to noise,
etc.
What appears to be trouble is not always serious. Check the following points before calling a
service centre.
TROUBLESHOOTING
Symptoms
• CD cannot be played back.
• CD sound is sometimes
interrupted.
• Sound cannot be heard from
the speakers.
• SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
• Static noise while listening to
the radio.
• “NO DISC” appears on the
display.
• “RESET 8” appears on the
display.
• “RESET 1-RESET 7” appears
on the display.
• CD can be neither played
back nor ejected.
• The unit does not work at all.
Remedies
Insert the CD correctly.
Stop CD play while driving on
rough roads.
Change the CD.
Check the cords and
connections.
Adjust it to the optimum level.
Check the cords and
connections.
Set “P. AMP SWITCH” correctly.
See page 32.
Store stations manually.
Connect the antenna firmly.
Insert CD.
Insert it correctly.
Connect this unit and the CD
changer correctly and press the
reset button of the CD changer.
Press the reset button of the
CD changer.
Press CD and SEL at the same
time for more than 2 seconds.
(“PLEASE EJECT” appears on
the display.) When you open the
control panel by pressing
0
, be
careful not to drop CD when it is
ejected.
Press
and SEL at the
same time for more than 2
seconds to reset the unit. (The
clock setting and preset stations
stored in memory are erased.)
EN44-46.KD-SX1000R[E]/1
98.6.3, 5:39 PM
45