11
OPERATIONS
2
Select the item you want.
• For details about using number buttons, see
page 6.
• To select an item from the submenus, repeat this
step.
•
To move to the next or previous page of the
current menu,
press
4
/
¢
.
•
To return to the menu,
press
7
on the remote
controller.
On-Screen operations
Displaying the On-Screen information
You can check the track number and elapsed playing
time if the monitor is turned on.
On the Remote ONLY:
While playing a disc...
Ex.: When playing back a VCD
1
Disc type
2
Current track number/total number of tracks in the
current folder (for MP3/WMA)/disc (audio CD/VCD)
3
The status of PBC
• When PBC is deactivated, the indication is in
gray.
4
Repeat mode (See also page 13.)
• : Repeats current track.
• : Repeats all tracks on a disc.
5
Elapsed playing time
•
To turn off the On-Screen bar,
press the button
again.
Specifying the playback point by time — for
VCD only
On the Remote ONLY:
1
On-screen bar appears on the screen.
2
Highlight the position of the time you want
to change.
3
Enter the number.
• For details about using number buttons, see
page 6.
4
Repeat steps 2 and 3 to specify the desired
point.
5
Confirm
the
entry.
Playback starts from the position you specified.
Specifying the track — for audio CD/VCD
only
Perform the above procedure to select the track
number.
• Highlight the track number in step
2
, then enter the
desired track number in step
3
.
EN_KD-SV3704[UI].indb 11
EN_KD-SV3704[UI].indb 11
08.12.12 2:33:31 PM
08.12.12 2:33:31 PM