ENGLISH
38
EXTERNAL COMPONENT OPERATIONS
Playing external components
For KD-SH909:
You can connect two external components to this
unit.
Connect one to the MP3 INPUT jack on the
control panel, and the other to the LINE IN plugs
on the rear.
• To use the external component connected to
LINE IN plugs on the rear, set “LINE IN” to
“ON” (see page 33).
• To use the external component connected to
the MP3 INPUT jack on the control panel, set
“AUX IN” to “ON” (see page 34).
You can connect a JVC DVD player or VCR
to the LINE IN plugs.
You can operate a JVC DVD player or VCR
through this receiver using the number
buttons on the control panel.
When you operate the VCR, you have to
change the operation mode of the number
buttons from the DVD operation mode to the
VCR operation mode. (See “To select the
target component to operate through this
receiver – KEY SEL” on page 34.)
1
Select the external component—AUX
INPUT (AUX) or LINE INPUT (LINE).
When you select a source,
the power automatically
comes on.
Each time you press the
button, the source changes
as described on page 8.
AUX INPUT (AUX): To select the
component connected
to the MP3 INPUT jack
on the control panel
LINE INPUT (LINE): To select the
component connected
to the LINE IN plug
2
Turn on the connected component
and start playing the source.
• If connecting a JVC’s DVD player or VCR,
you can perform the following operations.
EB
E-BASS
DISP
BAND
MODE
MP3
INPUT
MP3 player, MD player, etc.
MP3 INPUT*
* This MP3 INPUT is not compatible with digital signals.
EN38-39SH909_707[J]5.pm5
1/16/02, 9:22 AM
38
