KD-SH707
1-18
Reattach the link plate spring.
Reattach the link plate to the link plate spring while
joining them at joint
b’
.
Reattach the part
y
of the select arm (R) to the first
peak of the link plate while joining the two joints
z
with the slots. Then turn the select arm (R) as shown
in the figure. The top plate is joined to the joint
a’
.
1.
2.
3.
Reattaching the Select arm (R) / link
plate (See Fig.25 and 26)
Prior to performing the following procedure, remove
the top plate assembly.
Bring up the select arm (R) to release from the link
plate (joint
y
) and turn as shown in the figure to
release the two joints
z
and joint
a’
.
Move the link plate in the direction of the arrow to
release the joint
b’
. Remove the link plate spring at
the same time.
1.
2.
Removing the select arm (R) / link plate
(See Fig.21 and 22)
When reattaching the select arm (R),
check if the part
c’
is correctly fitted and
if each part operates properly.
CAUTION:
Reverse the above removing procedure.
REFERENCE:
Before removing the link plate, remove
the select arm (L).
REFERENCE:
Fig.26
Fig.21
Fig.22
Top plate
Top plate
Select arm (L)
Select lock arm
Select lock arm
Select lock
arm spring
Select lock arm
Joint r
Link plate
Link plate
Link plate
Joint z
Joint z
Joint a'
Select arm (R)
Part y
Joint s
q
Link plate spring
Joint b'
Joints t
Hook u
Fig.25
Select
lock arm
Point x
Select arm (L)
Select arm (R) Joint a'
Joint b'
Link plate spring
Part y
Joint z
Joint z Part y
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
