7
ENGLISH
1
Turn on the power and select the
source.
When you press the button
for the first time, the power
comes on. Then each time
you press the button, the
source changes as follows.
*
If a CD is not in the loading slot, you cannot
select CD as the source to play.
**
Without connecting the CD changer, you
cannot select it as the source to play.
***
ONLY for KD-SH55: To select the external
component, you have to change the external
component setting (see page 20).
To operate the tuner (FM or AM),
see pages 8 – 10.
To operate the CD player,
see pages 11 – 13.
To operate external components
(AUX INPUT and LINE INPUT),
see pages 24 – 25.
To operate the CD changer,
see pages 26 – 27.
2
Adjust the volume.
Note:
After adjusting the volume, you can push in the
control dial to avoid unintended operations.
To use it again, push the control dial again to
make it come out.
3
Adjust the sound as you want.
(See page 14.)
To drop the volume in a moment
Press and hold
/ATT while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press and
hold the button again.
• If you turn the control dial clockwise, you can
also restore the sound.
To turn off the power
Press and hold SOURCE
until “SEE YOU”
appears on the display.
To increase the volume.
BASIC OPERATIONS
To decrease the volume.
2
1
Note:
When you use this unit for
the first time, set the built-in
clock correctly, see page 17.
FM TUNER
*
For KD-SH77
CD PLAY
CD CHANGER
LINE INPUT
AUX INPUT
AM TUNER
or
**
**
FM TUNER
*
For KD-SH55
CD PLAY
CD CHANGER
LINE INPUT
AUX INPUT
AM TUNER
or
or
***
Volume level indicator
Volume level appears.
EN07-07.KD-SH77_55[J]f
01.1.9, 4:31 PM
7
