KD-S790
(No.49788)1-5
2.1.3 Removing the heat sink
(See Fig.5)
(1) Remove the two screws
C
and two screws
D
on the left
side of the main body.
Fig.5
2.1.4 Removing the bottom cover
(See Figs.6 and 7)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly and heat sink.
(1) Turn over the body and release the two joints
c
, two joints
d
and joint
e
.
CAUTION:
Do not damage the main board when releasing the joint
e
us-
ing a screwdriver. (See Figs.6 and 7)
Fig.6
Fig.7
2.1.5 Removing the rear bracket
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink and bottom
cover.
E
, three screws
F
and two
on the back of the body.
(2) Remove the rear bracket.
Fig.8
C
D
Heat sink
Joint c
Joint d
Joint e
Bottom cover
Joint d
Joint c
Joint e
Bottom cover
F
G
E
E
F
Rear bracket
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
